Setting Up The Emulation Options; Setting Up From Touch Panel Display - Toshiba e-STUDIO550 Operator's Manual
Hide thumbs
Also See for e-STUDIO550:
- Operator's manual (179 pages) ,
- Service manual (346 pages) ,
- Service handbook (314 pages)
Table of Contents
Advertisement
In the Emulation options, you can specify the Emulation mode, PCL or PostScript, that the GA-1140 is
restricted for printing. When you select the Emulation mode either PCL or PS, Jobs sent to the GA-
1140 that does not match the Emulation mode are not printed.
It is configure to automatically select the Emulation mode as a factory default so that the GA-1140 will
print both PCL and PS jobs as switching to the appropriate page description language for each job. If
you do not need to restrict the Emulation mode for printing, do not change the Emulation options.
You can set up the Emulation options from Touch Panel Display or TopAccess. There are no
difference between the setup from Touch Panel Display and setup from TopAccess for Emulation
options.
Setting up from Touch Panel Display
1
Accessing the Setting menu on the Touch Panel Display.
P18 "Accessing Setting Menu"
2
Accessing the Emulation Setup screen.
1. Press [EMULATION] on the Setting menu.
3
Press desired Emulation option and press
[SET].
• The screen returns to the Setting menu.
Auto Select
Select this not to restrict to print. In Auto mod, the GA-1140 switches to the appropriated page
description language for each job.
PCL
Select this to allow the GA-1140 to print only PCL jobs.
Setting up the Emulation Options
79
Advertisement
Table of Contents
Troubleshooting
