Table of Contents
Advertisement
Chapter 3
Maintaining the System
Figure 3-27
1
1
Special Considerations for Cisco UCS Virtual Interface Cards
Table 3-6
install to the SIOC adapter card socket.
Table 3-6
Cisco UCS C3160 Requirements for Supported VICs
Virtual Interface Card
(VIC)
Cisco UCS VIC 1227
UCSC-MLOM-CSC-02
The Cisco UCS VIC 1227 (UCSC-MLOM-CSC-02) is not compatible to use in Cisco Card NIC mode
Note
with a certain Cisco SFP+ module. Do not use a Cisco SFP+ module part number 37-0961-01 that has a
serial number in the range MOC1238xxxx to MOC1309xxxx. If you use the Cisco UCS VIC 1227 in
Cisco Card NIC mode, use a different part number Cisco SFP+ module, or you can use this part number
37-0961-01 if the serial number is not included in the range above. See the data sheet for this adapter for
other supported SFP+ modules:
OL-32062-01
Replacing an Adapter Card Inside the SIOC
Thumbscrew on adapter card
describes the requirements for the supported Cisco UCS virtual interface cards (VICs) that
Number of
VICs Supported
Minimum Cisco
in System
IMC Firmware
2
2.0(2)
2
Horizontal socket on SIOC board
Minimum VIC
Firmware
4.0(0)
Cisco UCS VIC 1227 Data Sheet
Cisco UCS C3160 Rack Server Installation and Service Guide
Installing or Replacing System Components
2
Minimum Nexus OS on an
Upstream Nexus Fabric
Interconnect
5.0
3-49
Advertisement
Table of Contents
