Configuring Mtu Settings; Configuring The Mac Address - Cisco RV180 Administrator's Manual
Hide thumbs
Also See for RV180:
- Administration manual (187 pages) ,
- Manual (14 pages) ,
- Datasheet (5 pages)
Table of Contents
Advertisement
Configuring Networking
Configuring the WAN (Internet) Settings
STEP 4
STEP 5
STEP 6
STEP 1
STEP 2
STEP 3
Cisco RV180/RV180W Administration Guide
My IP Address
Server IP Address
Enter MTU information. (See
Enter MAC Address information. (See
Click Save.
Configuring MTU Settings
The Maximum Transmission Unit (MTU) is the size of the largest packet that can be
sent over the network. The default MTU value for Ethernet networks is usually
1500 bytes and for PPPoE connections, it is 1492 bytes.
To configure the MTU settings:
Choose Networking > Choose Networking > WAN (Internet) > IPv4 WAN
(Internet).
Choose the MTU type:
•
Default—Unless a change is required by your ISP, we recommend that you
choose Default in the MTU Type field. The default MTU size is 1500 bytes.
•
Custom—If your ISP requires a custom MTU setting, choose Custom and
enter the MTU size (in bytes) in the MTU Size field.
Click Save.
Configuring the MAC Address
The Cisco RV180/RV180W has a unique 48-bit local Ethernet hardware address.
In most cases, the default MAC address is used to identify your Cisco RV180/
RV180W to your ISP. However, you can change this setting if required by your ISP.
Enter the IP address assigned to you by your ISP.
Enter the IP address of the L2TP server.
Configuring MTU Settings, page
Configuring the MAC Address, page
2
29.)
29.)
29
Advertisement
Table of Contents
