Adjusting The Harness And Brush Cutter; Balance Xt - Husqvarna 555FX Operator's Manual
Hide thumbs
Also See for 555FX:
- Operator's manual (112 pages) ,
- Workshop manual (65 pages) ,
- Operator's manual (44 pages)
Table of Contents
Advertisement
Available languages
Available languages
Adjusting the harness and brush
cutter
WARNING! When using a brush cutter it
!
must always be hooked securely to the
harness. Otherwise you will be unable to
control the brush cutter safely and this
can result in injury to yourself or others.
Never use a harness with a defective
quick release.
Balance XT
Safety release
Push down the red release lever to release the machine
from the harness.
Adjusting the harness
1
Adjust the harness to suit the person's height. Move
the shoulder strap attachment to a suitable hole in the
back plate by pressing in the spring-loaded lock and
twisting the shoulder strap attachment.
1
Move the strap for the support hook to the upper or
the lower hole depending on if you are going to clear
a forest or trim grass.
58 – English
ASSEMBLY
2
Tighten the hip strap so that it sits securely.
3
The hip belt should hang roughly in line with the hip
bone.
4
Press the breast plate together.
5
Attach the side belt to the breast plate.
6
To relieve pressure on the rib cage, it is possible to
connect the side belt with a belt to the hip pad.
(Suitable for females).
7
Adjust the shoulder strap to distribute the load evenly
across your shoulders. Press downwards on the
suspension hook to load the harness.
8
Adjust the side belts to fit around the rib cage until the
breast plate is centred on the chest.
9
Adjust the height of the hanging ring as per the
instructions. (For forest clearing, the suspension
should hang approx. 10 cm below your hip bone.)
- Quick Links:
- English
- Carburetor
- Technical Data Technical Data
Hide quick links:
Advertisement
Chapters
Table of Contents
