Miele T 6351 Operating Instructions Manual
Hide thumbs
Also See for T 6351:
- Operating instructions manual (32 pages) ,
- Operating instructions manual (26 pages)
Related Manuals for Miele T 6351
Summary of Contents for Miele T 6351
-
Page 1: Operating Instructions
Operating Instructions Tumble Dryers T 6351 T 6551 T 6751 To prevent accidents ö] and machine damage read these instructions before installation or use. M.-Nr. 05 640 910... - Page 2 M.-Nr. 05640910...
-
Page 3: Table Of Contents
Contents Page WARNING AND SAFETY INSTRUCTIONS ......Caring for the environment ........Guide to the tumble dryer . -
Page 4: Warning And Safety Instructions
WARNING AND SAFETY INSTRUCTIONS Installation, repair and maintenance work Installation, repair and maintenance work should be by a Miele authorized service should be by a Miele authorized service technician. Work by unqualified persons technician. Work by unqualified persons could be dangerous and may void the war- could be dangerous. - Page 5 Check the condition of the air inlet and air out- let vents. If no damage is evident to any of the parts checked, the dryer can be restarted. If the fault occurs again, call the Miele Techni- cal Service Department. Accessories Only use genuine Miele accessories.
-
Page 6: Caring For The Environment
Caring for the environment Disposal of the packing material Disposal of an old machine The transport and protective packing Old machines contain materials which can be are environmentally friendly for recycled. Please contact your local recycling disposal and can be recycled. authority about the possibility of recycling these materials. -
Page 7: Guide To The Tumble Dryer
Guide to the tumble dryer 1 -Main power switch 5 -Lint filter 2 -Control panel 6 -Lint compartment flap 3 -Drum door 7 -Four adjustable screw feet 4 -Door handle 8 -Vent pipe / Vent socket Control panel 9 --Program sequence/Fault indicators 10--Program selector with selector button 11--Push buttons 12--Additional display... -
Page 8: Pushbuttons / Program Selector
Description of the machine Push buttons Program selector ”On-Off s ” button ” L Low temperature” button Lowers the drying temperature for delicate fab- rics (e.g. acrylics). The program selector is used to select the pro- Press in the button to select this feature. gram required. -
Page 9: Additional Display With Selector Button
Description of the machine Additional display with selector button recorded and displayed. The current residual moisture value is shown during the program. "Time" Displays the time set for program The hours are shown in the left display field and the minutes in the right fields. After the program has started the remaining run time is shown instead of the total time. -
Page 10: Program Sequence And Fault Indicators / Fault Messages
Lint filter (lights up) The messages are: ”Heating” Fault in the heating system. Action: Call Miele’s Technical Service Department. ”Safety period” The maximum running time of the drying pro- gram was exceeded because the residual moisture at the start of the program was too high. -
Page 11: Reset" Button / Emergency Stop Button
Description of the machine "Emergency Stop" button Only use in an emergency. Do not use this button to turn off the machine during normal operation. To reset the "Emergency Stop" button after it has been used, turn the ribbed knob clock- wise. -
Page 12: Before Using For The First Time
Before using for the first time Before using for the first time, wipe the inside Weights of load (Dry weight) of the drum with a soft dry cloth. T 6351 T 6551 T 6751 Preparing the laundry Sort the laundry according to fabric type and Cottons weave for even drying results. -
Page 13: Program Selection
Selecting a program Close the drum door. Once the required level of dryness has been reached the laundry is cooled and Turn on the power main the drying program ends. (on site). Press in the “ s On/Off” button. Special programs Select a program by turning the program selector clockwise or counterclockwise: 1. - Page 14 Selecting a program 2. Bedding The end of the drying program is indi- To dry bedding, which has a laundry care r Anti-crease / End” in- cated by the “ label stating that it is machine-washable: dicator lighting up and the buzzer sounding if selected.
-
Page 15: Anti-Crease
Selecting a program Anti-crease If the laundry is not removed from the machine at the end of the program an anti-crease cycle will automatically start. The drum turns at in- tervals to minimize creasing in the laundry. The anti-crease cycle runs 59 minutes. Interrupting the program The program will stop if the door is opened during operation to add or remove articles of... -
Page 16: Reprogramming
Reprogramming Changing the preset options of a drying program Individual drying programs can be repro- grammed to meet special requirements, usage and processes. Example of reprogramming Press in the “ s On-Off” switch. The “On” indicator will light. Basic position: The dryer must be off and the drum door Press the “... - Page 17 Reprogramming Example 1: Reprogramming the drum reversing action period (standard = 1 minute and 27 seconds) in the cotton programs. A drum reversing action period can be se- lected from 20 seconds to 2 minutes. Here a reversing time of 1 minute and 5 sec- onds is chosen.
- Page 18 Reprogramming To exit programming: Turn the program selector to - “P3" and ”3" will alternate in the additional display. Use the selector switch to choose the pro- Release the “ s On/Off” button. gram to be changed. Machine iron rr (20%). Program Please enter any program changes to the "Reprogramming possibilities"...
-
Page 19: Reprogramming Possibilities / Programmable Residual Moisture
5 secs, after the selector button is pressed) 1 = temperature only 2 = residual moisture only Programme position is not occupied. Programmable residual moisture values Program T 6351 T 6551 / T 6751 Notes Enter Options Options program changes here... -
Page 20: Cleaning And Care
The following should be checked and if neces- the power supply via the mains switch. sary serviced once a year by an authorized Miele Service technician: Do not use a high pressure cleaner or Heater element and heater shaft. water jet to clean the machine. -
Page 21: Guide To The Data Plate Symbols
Guide to the data plate symbols 1 Machine type Noise emission 2 Serial number of the machine 3 Voltage/Frequency T 6351 72.7 dB 4 Mains fusing T 6551 74.2 dB 5 Drive motor T 6751 75.1 dB 6 Plate diameter/Plate qty *... -
Page 22: Installation
Installation Installation, repair and maintenance work To facilitate cleaning of the duct, cleaning should be by a Miele authorized service techni- flaps or covers should be fitted on the bends cian. Work by unqualified persons could be wherever possible. dangerous and may void the warranty. -
Page 23: Leveling The Unit
Installation Leveling the unit Electrical connection The machine must be leveled for proper oper- The electrical connections to the dryer must ation. The machine does not need to be in- be in accordance with instructions given on stalled on a base, however any unevenness in the installation diagram and comply with local the floor must be compensated for. -
Page 24: Steam Connection
Installation Steam connection Please pay attention to the installation dia- gram and instructions supplied with the ma- chine. These are important for the connection to steam. All removable outer housing parts must be refitted after the steam connection has been made. - Page 25 Notes: M.-Nr. 05640910...
- Page 26 Notes: M.-Nr. 05640910...
- Page 27 M.-Nr. 05640910...
- Page 28 USA: Miele, Inc. 9 Independence Way Princeton, NJ, 08540 Phone: 800-843-7231 609-419-9898 Fax: 609-419-1435 Internet: www.mieleusa.com Technical Service 800-999-1360 E-Mail: techserv@mieleusa.com WEST COAST REGIONAL SERVICE 1-800-245-8215 Canada: Miele Limited 55G East Beaver Creek Road Richmond Hill, Ontario L4B 1E5 Phone: 905-707-1171...