hit counter script
Miele T 640 Operating Instructions Manual
Miele T 640 Operating Instructions Manual

Miele T 640 Operating Instructions Manual

Vented tumble dryer

Advertisement

Operating instructions

for vented tumble dryer
T 640
Q\
It is essential to read these
operating instructions before
installing or using the machine
to avoid the risk of accident,
or damage to the machine.
M.-Nr. 04 939 851

Advertisement

Table of Contents
loading

Summary of Contents for Miele T 640

  • Page 1: Operating Instructions

    Operating instructions for vented tumble dryer T 640 It is essential to read these operating instructions before installing or using the machine to avoid the risk of accident, or damage to the machine. M.-Nr. 04 939 851...
  • Page 2: Table Of Contents

    Contents Contents Guide to the appliance..........4 Caring for the environment .
  • Page 3 Contents Cleaning and care Fluff filter............22 Tumble dryer .
  • Page 4: Guide To The Appliance

    Guide to the appliance Guide to the appliance General view Supply cable for electrical connection Control panel Door Venting connection, rear, right or left (supplied with the rear socket open) Four height-adjustable screw feet...
  • Page 5: Control Panel

    Guide to the appliance Control panel “I-On/0-Off” button Additional option buttons for switching the appliance on and off. Indicator lights: on= option selected When the machine is switched on, the off= option not selected drum light will come on as you open the door.
  • Page 6: Caring For The Environment

    Caring for the environment Caring for the environment Disposal of packing Disposal of your old machine/appliance The transport and protective packing has been selected from materials Old machines/appliances contain ma- which are environmentally friendly for terials which can be recycled. Please disposal and can normally be recycled.
  • Page 7: Warning And Safety Instructions

    Repairs should only be under- washed in a water solution and are taken by a Miele approved engineer. marked on the manufacturer’s wash Adequate ventilation is essential, care label as being suitable for tumble especially where another appliance drying.
  • Page 8 Faulty components must only be – children climbing into the machine or exchanged for Miele original spare hiding objects in it. parts. Only when these parts are fitted can the safety standards of the ma- There is a danger of fire with fab- chine be guaranteed.
  • Page 9 Using accessories Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, guaran- tee, performance and product liability claims may be invalidated. Disposing of your old machine Before discarding an old machine, unplug it and render the plug use- less.
  • Page 10: Brief Instructions

    Brief instructions Brief instructions Brief description Please read the sections on “Warn- Programmes are selected by turning ing and safety” and “Notes on the programme selector and can be laundry care”. supplemented by pressing the addi- tional option buttons. Switching the machine on and loading the laundry Press the “START”...
  • Page 11: Notes On Laundry Care

    Notes on laundry care Notes on laundry care – Pure linen* Before drying, check the drying sym- These items should only be machine bol on the textile care label. dried if specified as suitable by the manufacturer on the textile care label, Significance of symbols: as the surface of the fabric may other- wise “roughen”.
  • Page 12: How To Dry Correctly

    How to dry correctly How to dry correctly Hints on saving energy Make sure there is no washing detergent dispenser among the Make sure that your laundry has laundry, as this could melt and dam- been thoroughly spun at the highest age the machine and the laundry.
  • Page 13: Selecting A Programme

    How to dry correctly Selecting a programme Selecting additional option(s) Turn the programme selector to the Additional options can be switched programme required. on and off as required. See the section on “Additonal options" See the “Programme chart” for a de- for a description of each option.
  • Page 14: After Drying

    How to dry correctly "Clean out airways" indicator light After drying This indicator light shows that the dryer When the drying programme has fin- is not working most efficiently or econ- ished the “Anti-crease / Finish” se- omically. quence indicator light comes on. The causes of this check message can Press the “Door”...
  • Page 15: Additional Options

    Additional options Additional options Short The programme running time is re- duced. – For drying fabrics that are not deli- cate. Low temperature The drying temperature is reduced. – For delicate fabrics (drying symbol r), eg acrylic. Additional options can be switched on or off by pressing the relevant but- The programme running time is in- ton before the start of a programme.
  • Page 16: Programme Chart

    Programme chart Programme chart Programme Fabric type maximum Special notes load COTTONS Multi-layered fabrics, not 5 kg Do not dry jersey wear in the Extra dry thoroughly dried with Extra dry programme – “Normal +” tendency to shrink. Mixed load of cotton fabrics, 5 kg –...
  • Page 17 Programme chart Programme Fabric type Maximum Special notes load TIMED DRYING Individual items, (eg bathing 5 kg – Warm air costumes, bath towels, tea towels) Multi-layered fabrics whose layers have different drying characteristics. Items which are only to be 5 kg –...
  • Page 18: Altering A Programme

    Altering a programme Altering a programme To open the door during a pro- Once a programme has started, no changes to the programme or addi- gramme to add or remove tional options will be accepted. garments If the programme selector is turned to Cancel the programme by: a different programme after a pro- Pressing the “Door”...
  • Page 19: Electronic System Lock

    Electronic system lock Electronic system lock The system lock prevents anyone from interfering with the dryer. To activate the system lock Ensure that the door is closed and that the programme selector is turned to “Finish”. Turn the machine on. Press the “Short”...
  • Page 20: Programmable Functions

    Programmable functions Programmable functions Programmable function: "Memory" Notes The additional options selected pre- The programmable functions can be viously for specific programmes are used to create drying programmes to stored in the machine’s memory. suit your individual requirements. They will remain in the machine’s The memory programmable function memory until cancelled.
  • Page 21: Activating And Storing In The Memory

    Programmable functions If the “Machine iron” indicator light Activating and comes on, then the chosen function storing in the memory has been activated. The programmable functions are acti- Each programmable function can be vated using the additional option but- switched on or off by pressing the tons in special combinations with the “START”...
  • Page 22: Cleaning And Care

    Remove any fluff from the hollow part of the door holder through the wide slit at the bottom. A cleaning brush is available at extra cost from the Miele Spare Parts Department. Push the cleaned filter back into the door holder and close the door.
  • Page 23: Problem Solving Guide

    Was the “START” button pushed in? – Has the fuse or circuit breaker tripped? If so, contact the Miele Service Department. Static charge can be reduced . . . items made of synthetic by adding a fabric conditioner fibres are charged with static...
  • Page 24 Problem solving guide What to do if . . . Cause . . . Remedy . . . Ventilation to and from the dryer Open a door or window while . . . the drying process goes is insufficient (eg in a small room). the machine is in operation for on too long increased air flow.
  • Page 25 If the light continues to flash, there could be a technical fault. Contact the Miele Service Department. Important: Switch the dryer off with the "l-On/0-Off" button..the “Clean out airways” in- dicator light comes on...
  • Page 26 Before changing the bulb, discon- The temperature resistant bulb should nect the machine from the mains only be ordered from your Miele dealer power supply. or the Miele Spare Parts Department. Opening the door in the event of a power failure.
  • Page 27: After Sales Service

    – your Miele dealer When, for example, new programmes are developed or new fabrics are intro- – your nearest Miele Service Depart- duced, a service engineer will be able ment (see back cover for the ad- to modify existing programme cycles dress).
  • Page 28: Installation

    The appropriate stack- ing kit* to match your washing machine is required. * These items are all available from your Miele dealer. The screw feet can be adjusted to (N.B. If you wish to push your machine...
  • Page 29: Installation - Venting

    Installation - venting Installation - venting Installation to the left or right side of The moist air from the dryer must be the machine vented via a ducting system. When installing avoid: – very long venting systems – too many bends or corners –...
  • Page 30: To Calculate The Effective Duct Length

    Installation - venting A short passage for the expelled air is To calculate the effective duct preferable to ensure the tumble dryer length: functions as efficiently as possible. Ex- Measure the actual duct length: pelled air is slowed down in the vent duct by friction against the inner walls –...
  • Page 31 Installation - venting Table II Example: Side connection, left ..2.00 m Effective duct length Internal diameter Length (L) ....1.20 m 0 - 20 m 100 mm Lower radius (R) .
  • Page 32 Installation - venting Table III Installing several machines: We recommend that when several ma- Number of Duct diameter chines are being installed each ma- machines increase factor from Table II chine should be fitted with a non-return 1.00 flap (available from a good builders’ 1.25 merchant).
  • Page 33 Installation - venting Moist air can be ducted outside by a Example: Window vent kit wall vent kit or window vent kit, both of which are available from the Miele Spare Parts Department. Example: Wall vent kit 1. Louvre frame 4.
  • Page 34 Installation - venting Installation - example 1 Installation - example 2 Upward ducting via flexible hose to an exhaust Upward ducting via plastic piping to wall vent kit flue (side view). (side view). 1. Wall pipe A. = Wire spiral-wound hose 1.
  • Page 35: Electrical Connection

    Electrical connection Electrical connection The wire which is coloured blue must Electrical connection U.K. be connected to the terminal in the All electrical work should be carried out plug which is marked with the letter N only by a suitably competent person, in or coloured black.
  • Page 36: Consumption Data

    Consumption data Consumption data Programmes Capa- Final spin speed Electricity Drying time incl. city (in a domestic washing consump- cooling down time machine) tion Minutes 10 A 16 A COTTONS 1200 Extra dry 1400 3.05 1600 1200 Normal + 1400 1600 800 (70 % residual moisture) Normal...
  • Page 37: Technical Data

    Technical data Technical data Height......850 mm (adjustable +10/-5 mm) Width ......595 mm Depth .
  • Page 40 Alteration rights reserved/001 0600 This paper consists of cellulose which has been bleached without the use of chlorine.

Table of Contents