SPECIAL MAINTENANCE
Attaching the Zeolite-plus filter
• After installing the air conditioner, attach the supplied Zeolite-plus filter.
Preparation:
1.
Turn off the air conditioner using the remote control.
Cleaning the Zeolite-plus filter
• Clean the filter when you clean the plasma pure filter. (Clean approximately once every six months.)
Preparation:
1.
Turn off the air conditioner using the remote control.
1
Open the air inlet grille.
Lift up the air inlet grille until it clicks into place.
2
Take off the air filter from the left side.
Grasp the left and right handles of the air filter and lift up slightly and then pull downward to
remove the filter from the filter holder.
3
Remove the Zeolite-plus filter from the front panel.
4
Wash the Zeolite-plus filter in water, and then drain.
• If the filter is dirty with dust and dirt, use a vacuum cleaner to remove the dirt before washing
with water. Also, be sure to always use clean water when washing. If dirty water is used, the
debris in the water can adhere to the filter.
• Do not rub the filter surface.
• In the final of the water washing, be sure to always rinse the filter with clean water.
• If the filter is particularly dirty, add a neutral detergent at the standard concentration and then
rinse with clean water until there are no more soap bubbles.
• Drain gently after washing with water.
5
Allow the Zeolite-plus filter to dry in the sun.
• It takes about six hours for the filter to dry in direct sunlight.
6
Attach the Zeolite-plus filter and the air filter, then close the air inlet grille.
INFORMATION
INFORMATION
• It is recommended that you replace the filter once about every six years.
Deodorizing performance will drop when there are severe stains due to extended
periods of usage such as due to tar accumulation from cigarette smoke.
Items sold separately
Zeolite-plus filter (RB-A612DE)
EN
20