hit counter script

Troubleshooting - Sony WRT-847A Operating Instructions Manual

Uhf synthesized transmitter unit
Hide thumbs Also See for WRT-847A:
Table of Contents

Advertisement

Available languages

Available languages

Troubleshooting

Symptom
The sound is weak.
There is distortion in the sound.
There is sound interruption or
noise.
14
(GB)
Meaning/Remedy
• The audio gain level is too low. b The output level is low. Press the + button in audio gain level
setting mode to raise the gain level.
• The volume on the amplifier, mixer or tuner is low. b Adjust the volume.
The audio gain level is too high. b The input level is extremely high. Press the – button in audio gain
level setting mode to lower the gain level.
• The receiver's antenna is incorrectly connected. b Connect the antenna correctly according to the
operation manual of the tuner or antenna divider.
• The antenna divider is turned off. b Turn the antenna divider on. It is possible for the tuner to
receive signals even when the antenna divider is turned off, but sound interruption or noise may
occur.
• The RF indicator on the tuner lights even when the transmitter is off. b Jammed transmissions are
being received.
Determine which channels are usable (i.e., channels for which the RF indicator on the tuner does
not light) and set the tuner and transmitter to the same usable channel.
• Two or more wireless microphones/transmitters are set to the same channel. b Make sure no two
microphones/transmitters are set to the same channel. Set each microphone/transmitter to a
different channel.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wrt-847b

Table of Contents