Page 1
3 7 63 1515 0 SERVICE MANUAL AEP Model UK Model Ver 1.0 2001.09 E Model Australian Model ST-S9 is the tuner section in MHC-S9D. SPECIFICATIONS Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range 87.5 – 108.0 MHz...
Singapore and E models 4-232-349-3 AND IN THE PARTS LIST ARE CRITICAL TO SAFE Mexican model 4-232-349-4 OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS Thai model 4-232-349-5 SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- Korean model 4-232-349-6 LISHED BY SONY.
ST-S9 3 7 63 1515 0 Remote control Setting the time 1 2 3 4 5 Turn on the system. Press CLOCK/TIMER (or CLOCK/TIMER SET on the remote). When you set the time for the first time, proceed to step 5.
ST-S9 SECTION 3 DISASSEMBLY 3 7 63 1515 0 • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW 3-2. CASE (Page 6) 3-5. TUNER PACK (FM/AM) 3-3. FRONT PANEL SECTION 3-7. DSP BOARD (Page 7)
ST-S9 3 7 63 1515 0 Note: Follow the disassembly procedure in the numerical order given. 3-2. CASE 3 case 1 screw (+BVTT3 × 6 (S)) 2 two screws (case 3 TP2) 2 two screws (case 3 TP2) L 13942296513 3-3.
3 7 63 1515 0 [GC Test Mode] Note: Use following buttons in the test mode. Enter the GC Test Mode no mark : Button of tuner unit (ST-S9) : Button of amplifier unit (TA-S9D) Procedure 1: : Button of DVD/video CD/CD unit (DVP-S9) 1.
ST-S9 SECTION 5 DIAGRAMS 3 7 63 1515 0 5-1. NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS Note on Printed Wiring Board: Note on Schematic Diagram: • All capacitors are in µF unless otherwise noted. pF: µµF • X : parts extracted from the component side.
ST-S9 3 7 6 3 1 5 1 5 0 5-10. IC PIN FUNCTION DESCRIPTION • MAIN BOARD IC501 M30622MGA-A77FP (SYSTEM CONTROLLER) Pin No. Pin Name Description Pin No. Pin Name Description AMP-DATA — Power supply terminal (+5V) Serial data output to the M61512FP (IC607)
ST-S9 3 7 63 1515 0 • DSP BOARD IC601 CXD9617R (AUDIO DIGITAL SIGNAL PROCESSOR) Pin No. Pin Name Description — Ground terminal XRST Reset signal input from the M61512FP (IC607) “L”: reset EXTIN Master clock signal input terminal Not used (fixed at “L”) Sampling frequency selection signal input terminal Not used (fixed at “L”)
Page 22
ST-S9 3 7 63 1515 0 Pin No. Pin Name Description — Ground terminal WMD0 S-RAM wait mode setting terminal Fixed at “L” in this set PAGE2 Page selection signal output terminal Not used (open) — Ground terminal PAGE1, PAGE0...
Page 23
ST-S9 3 7 63 1515 0 • DSP BOARD IC604 LC89056W-E (DIGITAL AUDIO INTERFACE RECEIVER) Pin No. Pin Name Description DISEL Selection terminal of data input terminal Fixed at “L” in this set DOUT Digital data output to the optical transceiver (IC609)
Page 24
ST-S9 3 7 63 1515 0 • DSP BOARD IC605 AK4527 (A/D, D/A CONVERTER) Pin No. Pin Name Description Audio serial data source selection signal input terminal SDOS “L”: internal ADC output, “H”: DAUX input (fixed at “L” in this set) Serial control mode selection signal input terminal “L”: 3-wire serial, “H”: I2C bus...
Page 25
ST-S9 3 7 63 1515 0 • PANEL BOARD IC601 MB90M407PF-G-109-BND (DISPLAY CONTROLLER) Pin No. Pin Name Description 1 to 6 G6 to G1 Grid drive signal output to the fluorescent indicator tube (FL601) 7 to 10 A1 to A4...
ST-S9 SECTION 6 EXPLODED VIEWS 3 7 63 1515 0 NOTE: • Items marked “*” are not stocked since they • -XX and -X mean standardized parts, so they • Abbreviation may have some difference from the original are seldom required for routine service. Some : Australian model one.
ST-S9 SECTION 7 3 7 63 1515 0 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark parts list may be different from the parts speci- are seldom required for routine service.
Page 36
ST-S9 3 7 63 1515 0 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page.