Manual Transmitter (Tx) Testing With Phoenix; General Instructions For Transmitter (Tx) Activation; Gsm Transmitter Activation - Nokia RM-596 Service Manual
Hide thumbs
Also See for RM-596:
- Service manual (33 pages) ,
- Service schematics (13 pages) ,
- Service schematics (15 pages)
Table of Contents
Advertisement
Troubleshooting flow — Page 3 of 3
Manual transmitter (TX) testing with Phoenix
General instructions for transmitter (TX) activation
Please note the following before performing transmitter tests:
• TX troubleshooting requires TX operation
• Do not transmit on frequencies that are in use
• The transmitter can be controlled in local mode for diagnostic purposes
• The most useful Phoenix tool for GSM transmitter testing is "RF Controls", in WCDMA transmitter testing
the best tool is "TX Control"
Note:
Never activate the GSM or WCDMA transmitter without a proper antenna load. Always connect
a 50 Ω load to the RF connector (antenna, RF measurement equipment or at least a 2 W dummy
load), otherwise the power amplifier (PA) may be damaged.
GSM transmitter activation
Steps
1. Set the phone to local mode.
2. Activate the RF controls tool in Phoenix ( Testing → GSM → RF Controls ).
Page 4 – 26
COMPANY CONFIDENTIAL
Copyright © 2010 Nokia. All rights reserved.
RM-596
Cellular RF troubleshooting
Issue 2
Advertisement
Chapters
Table of Contents
Troubleshooting
