hit counter script
Toro 51484 Operator's Manual
  1. Manuals
  2. Brands
  3. Toro Manuals
  4. Trimmer
  5. 51484
  6. Operator's manual
Toro 51484 Operator's Manual

Toro 51484 Operator's Manual

12in cordless trimmer
Hide thumbs Also See for 51484:
Table of Contents

Advertisement

Quick Links

See also: Operator's Manual
12in Cordless Trimmer
Model No. 51484—Serial No. 311000001 and Up
If you have questions or problems, contact us at
www.Toro.com or call toll free 1-800-237-2654 (US) or
1-800-248-3258 (Canada) before returning this product.

General Safety Rules

WARNING: When using electric gardening appliances, basic safety
precautions should always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
Read all instructions.
The term "power tool" in all of the warnings refers to your
mains-operated (corded) power tool or battery-operated (cordless)
power tool.
1.
Work area safety
A. Keep work area clean and well lit. Cluttered or dark areas
invite accidents
B. Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
C. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2.
Electrical safety
A. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
B. Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed
or grounded.
C. Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
D. Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
E. When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
F.
If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
3.
Personal safety
A. Stay alert; watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
© 2011—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com
B. Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
C. Prevent uninentional starting. Ensure the switch is in the
off-position before connecting to power source and/or
battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energizing power
tools that have the switch on invites accidents.
D. Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
E. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
F.
Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewelry, or long hair can be caught in
moving parts.
G. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices can
reduce dust-related hazards.
H. Keep hands and feet away from the cutting area.
4.
Power tool use and care
A. Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
B. Do not use the power tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
C. Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
D. Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
E. Store idle appliances indoors. When not in use, appliances
should be stored indoors in a dry and high or locked-up place,
out of the reach of children.
F.
Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other
condition that may affect the power tools operation. If
Register at www.Toro.com.
Form No. 3369-221 Rev E
Operator's Manual
Original Instructions (EN)
Printed in China
All Rights Reserved

Advertisement

Table of Contents
loading

Related Manuals for Toro 51484

Summary of Contents for Toro 51484

  • Page 1: General Safety Rules

    Form No. 3369-221 Rev E 12in Cordless Trimmer Model No. 51484—Serial No. 311000001 and Up Operator's Manual Register at www.Toro.com If you have questions or problems, contact us at www.Toro.com or call toll free 1-800-237-2654 (US) or 1-800-248-3258 (Canada) before returning this product.

  • Page 2: Safety And Instructional Decals

    B. Do not use battery-operated appliance in the rain. G. Keep cutting tools sharp and clean. Properly maintained C. Use only the following type and size battery(ies): Toro battery cutting tools with sharp cutting edges are less likely to bind model 88502.

  • Page 3: Setup

    Setup Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty. Auxiliary handle Latch Installing auxiliary handle. Brace Guard Mounting the guard to the base of the trimmer. Phillips head screw – No parts required Installing the Auxiliary Handle Installing the Guard Parts needed for this procedure:...

  • Page 4: Operation

    Starting the Trimmer Align the tongue of the battery pack with the cavity in the handle housing (Figure 5). Adjusting the Trimmer Height and Base Orientation No Parts Required • To adjust handle height, flip the auxiliary handle latch, slide it up or down to the desired height, then secure it in place by closing the latch (Figure 3).

  • Page 5: Advancing The Line

    vehicles. Charging time will be increased if not charged within Refer to the table below to interpret the LED indicators on the this range. battery charger. Turn the battery upside down and line up the battery terminal with LED COLOR the slot in the charger (Figure 7 and Figure 8).

  • Page 6: Maintenance

    Brush debris away from air intake vents on the back of the shaft to prevent the motor from overheating. Replacing the Spool Use only .065 in. (1.65 mm) diameter monofilament string. Use original G017509 manufacturer’s replacement string for best performance (Toro part Figure 10 number 88522). 1. Rotator button Remove the battery.

  • Page 7: Battery Pack Preparation For Recycling

    Make sure the end of the string extends approximately 6 in. (152 mm). Should this item need service, take the product to your Authorized Toro Install the new spool so that the string aligns with the eyelet in the Service Dealer.
  • Page 8 A Two-Year Full Warranty for Residential Use for the United States and Canada The Toro Company and its affiliate, Toro Warranty Company, pursuant to an agreement between them, jointly warrant this product for two years against defects in material or workmanship when used for normal residential purposes.* •...

Table of Contents