Table of Contents
Advertisement
14in Electric Trimmer
Model No. 51480—Serial No. 312000001 and Up
If you have questions or problems, contact us at
www.Toro.com or call toll free 1-800-237-2654 (US) or
1-800-248-3258 (Canada) before returning this product.
General Safety Rules
WARNING: When using electric gardening appliances, basic safety
precautions should always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
Read all instructions.
The term "power tool" in all of the warnings refers to your
mains-operated (corded) power tool or battery-operated (cordless)
power tool.
1.
Work area safety
A. Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
B. Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
C. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2.
Electrical safety
A. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools Unmodified plugs and
matching outlets will reduce risk of electric shock.
B. Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed
or grounded.
C. Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
D. Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts Damaged or
entangled cords increase the risk of electric shock.
E. When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
F.
If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
G. Disconnect the plug from the power source when the
appliance is not in use.
3.
Personal safety
A. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
© 2011—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
B. Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
C. Prevent uninentional starting. Ensure the switch is in the
off-position before connecting to power source and/or
battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energising power
tools that have the switch on invites accidents.
D. Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
E. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
F.
Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewelry, or long hair can be caught in
moving parts.
G. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices can
reduce dust-related hazards.
H. Keep hands and feet away from the cutting area.
4.
Power tool use and care
A. Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
B. Do not use the power tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
C. Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
D. Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
E. Store idle appliances indoors. When not in use, appliances
should be stored indoors in a dry and high or locked-up place,
out of the reach of children.
Register at www.Toro.com.
Form No. 3372-343 Rev A
Operator's Manual
Original Instructions (EN)
Printed in China
All Rights Reserved
Advertisement
Table of Contents
Related Manuals for Toro 51480
Summary of Contents for Toro 51480
-
Page 1: General Safety Rules
Form No. 3372-343 Rev A 14in Electric Trimmer Model No. 51480—Serial No. 312000001 and Up Operator's Manual Register at www.Toro.com If you have questions or problems, contact us at www.Toro.com or call toll free 1-800-237-2654 (US) or 1-800-248-3258 (Canada) before returning this product. -
Page 2: Safety And Instructional Decals
Maintain power tools. Check for misalignment or binding WARNING of moving parts, breakage of parts and any other To reduce the risk of electrical shock use the trimmer only with an condition that may affect the power tools operation. If extension cord intended for outdoor use, such as an extension damaged, have the power tool repaired before use. -
Page 3: Loose Parts
ID-1007 1. Warning 3. Do not use in wet environments. 5. Wear eye protection. 2. Read the Operator's Manual. 4. Do not use if cord is damaged. Setup Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty. -
Page 4: Installing The Guard
Slide the brace into the auxiliary handle so that the brace rests in the groove along the shaft (Figure 1). Slide the latch from the left through the handle and brace as shown and tighten the latch screw with a Phillips head screwdriver (Figure 1). -
Page 5: Operation
Operation • To adjust the trimmer height, open the height adjustment latch, then slide the shaft up or down to desired height, securing it in place with the latch (Figure 4). Each time before you use the mower, ensure that the control bar •... -
Page 6: Stopping The Trimmer
Trimming G015658 Figure 7 1. Lock switch 2. Trigger Stopping the Trimmer To stop the trimmer, release the trigger. Advancing the Line Note: The trimmer is equipped with an auto-feed head. With the trimmer running, release the switch trigger. Wait two seconds, then press the switch trigger. G016254 Figure 8 Note: The line will extend approximately 1/4 inch (6 mm) with... -
Page 7: Replacing The Spool
Replacing the Spool Use only .065 in. (1.65 mm) diameter monofilament string. Use original manufacturer’s replacement string for best performance (Toro part number 88512). Remove the battery. Push in the tabs on the side of the spool retainer (Figure 11). -
Page 8: Double-Insulated Appliance
A Two-Year Full Warranty for Residential Use for the United States and Canada The Toro Company and its affiliate, Toro Warranty Company, pursuant to an agreement between them, jointly warrant this product for two years against defects in material or workmanship when used for normal residential purposes.* •...