Table of Contents
Advertisement
Maintenance
Note: Looking for an Electrical Schematic or Hydraulic Schematic for your machine? Download a free copy of the schematic by
visiting www.Toro.com and searching for your machine from the Manuals link on the home page.
Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first 8 hours
After the first 50 hours
After the first 100 hours
Before each use or daily
Every 100 hours
Every 150 hours
Every 200 hours
Every 300 hours
Every 400 hours
Every 800 hours
Every 1,000 hours
Yearly
Important: Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
• Check the condition of the drive belt.
• Change the engine oil.
• Check the air filter for the carbon canister.
• Replace the carbon-canister filter.
• Perform the breaking in a new machine guidelines.
• Perform the pre-starting checks.
• Check the brake-fluid level.
• Check the engine-oil level.
• Check the tire pressure.
• Check gear-shift operation.
• Inspect the primary drive clutch.
• Check the radiator-coolant level.
• Grease the bearings and bushings.
• Inspect the air-cleaner filter (more often in dusty or sandy conditions).
• Check the condition of the tires and rims.
• Torque the wheel-lug nuts.
• Check the front wheel toe-in and camber.
• Check the transaxle-oil level.
• Check the operation of the Neutral gear-shift position.
• Clean the engine cooling areas
• Inspect the brakes.
• Change the engine oil (twice as often in special operating conditions).
• Change the oil filter (twice as often in special operating conditions).
• Replace the air-filter element (sooner if the element is dirty or damaged).
• Check the air filter for the carbon canister.
• Replace the carbon-canister filter.
• Clean the primary drive clutch (more often in dusty or muddy conditions).
• Adjust the parking brake if needed.
• Check the condition and tension of the drive belt.
• Grease the front wheel bearings.
• Inspect the fuel lines and connections.
• Replace the fuel filter.
• Change the transaxle fluid.
• Change the radiator coolant.
• Change the brake fluid.
• Complete all yearly maintenance procedures specified in the engine owner's manual.
24
Advertisement
Table of Contents
