Starting The Lsi Configuration Utility Program; Formatting A Hard Disk Drive; Creating A Raid Array Of Hard Disk Drives - IBM x3200 4362 User Manual
Hide thumbs
Also See for x3200 4362:
- Installation manual (100 pages) ,
- Problem determination and service manual (186 pages)
Table of Contents
Advertisement
v Hard disk drive capacities affect how you create arrays. The drives in an array
v If you use an integrated SAS/SATA controller with RAID capabilities to configure
v If you install a different type of RAID controller, see the documentation that
Starting the LSI Configuration Utility program
To start the LSI Configuration Utility program, complete the following steps:
1. Turn on the server.
2. When the prompt <<< Press <CTRL><C> to start LSI Configuration Utility
3. To select a controller (channel) from the list of adapters, use the arrow keys and
4. To change the settings of the selected items, follow the instructions on the
When you have finished changing settings, press Esc to exit from the program;
select Save to save the settings that you have changed.
Formatting a hard disk drive
Low-level formatting removes all data from the hard disk. If there is data on the disk
that you want to save, back up the hard disk before you perform this procedure.
Note: Before you format a hard disk, make sure that the disk is not part of a
mirrored pair.
To format a drive, complete the following steps:
1. From the list of adapters, select the controller (channel) for the drive that you
2. Select SAS Topology and press Enter.
3. Select Direct Attach Devices and press Enter.
4. To highlight the drive that you want to format, use the Up Arrow and Down
5. To start the low-level formatting operation, select Format and press Enter.
Creating a RAID array of hard disk drives
To create a RAID array of hard disk drives, complete the following steps:
Use this option to create an integrated mirror enhanced array of three to eight
disks, including an optional hot spare.
– Integrated Striping (IS) (also known as RAID 0)
Use this option to create an integrated striping array of two to eight disks. All
data on the array disk will be deleted.
can have different capacities, but the RAID controller treats them as if they all
have the capacity of the smallest hard disk drive.
a RAID 1 (mirrored) array after you have installed the operating system, you will
lose access to any data or applications that were previously stored on the
secondary drive of the mirrored pair.
comes with the controller for information about viewing and changing settings for
attached devices.
>>> is displayed, press Ctrl+C. If you have set an administrator password, you
are prompted to type the password.
press Enter.
screen. If you select Raid Properties, SAS Topology, or Advanced Adapter
Properties additional screens are displayed.
want to format and press Enter.
Arrow keys. To scroll left and right, use the Left Arrow and Right Arrow keys or
the End key. Press Alt+D.
Chapter 3. Configuring the server
55
- Quick Links:
- Features and Specifications
Hide quick links:
Advertisement
Table of Contents
