Cisco Catalyst 4500 Series Configuration Manual page 1448
Release ios xe 3.3.0sg and ios 15.1(1)sg
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1254 pages)
Table of Contents
Advertisement
Enabling and Configuring Ethernet OAM
Switch# show ethernet oam status int gi1/2
GigabitEthernet1/2
General
-------
Admin state:
Mode:
PDU max rate:
PDU min rate:
Link timeout:
High threshold action: error disable interface
Link fault action:
Dying gasp action:
Critical event action: no action
Link Monitoring
---------------
Status: supported (on)
Symbol Period Error
Window:
Low threshold:
High threshold:
Frame Error
Window:
Low threshold:
High threshold:
Frame Period Error
Window:
Low threshold:
High threshold:
Frame Seconds Error
Window:
Low threshold:
High threshold:
Receive-Frame CRC Error
Window:
Low threshold:
High threshold:
Transmit-Frame CRC Error: Not Supported
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
63-48
enabled
active
10 packets per second
1 packet per 1 second
5 seconds
no action
no action
100 x 1048576 symbols
5 error symbol(s)
5000 error symbol(s)
10 x 100 milliseconds
8 error frame(s)
8000 error frame(s)
1000 x 10000 frames
9 error frame(s)
9000 error frame(s)
100 x 100 milliseconds
1 error second(s)
none
10 x 100 milliseconds
10 error frame(s)
1000 error frame(s)
Chapter 63
Configuring Ethernet OAM and CFM
OL-25340-01
- Quick Links:
- Resetting a Switch to Factory Default...
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
