Cisco Catalyst 4500 Series Configuration Manual page 1469
Release ios xe 3.3.0sg and ios 15.1(1)sg
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1254 pages)
Table of Contents
Advertisement
Chapter 65
Configuring Call Home
You can select one or more alert groups to be received by a destination profile.
A Call Home alert is only sent to destination profiles that have subscribed to the alert group containing
Note
that Call Home alert. In addition, the alert group must be enabled.
To subscribe a destination profile to an alert group, perform this task:
Command
Step 1
Switch# configure terminal
Step 2
Switch(config)# call-home
Step 3
Switch(cfg-call-home)# alert-group
{all|configuration|diagnostic|
environment|inventory|syslog}
Step 4
Switch(cfg-call-home)# profile name
Step 5
Switch(cfg-call-home-profile)#
subscribe-to-alert-group configuration
[periodic {daily hh:mm | monthly date hh:mm |
weekly day hh:mm}]
Switch(cfg-call-home-profile)#
subscribe-to-alert-group all
Step 6
Switch(cfg-call-home-profile)#
subscribe-to-alert-group diagnostic
[severity catastrophic|disaster|
fatal|critical|major|minor|warning|
notification|normal|debugging]
Step 7
Switch(cfg-call-home-profile)#
subscribe-to-alert-group environment
[severity catastrophic|disaster|
fatal|critical|major|minor|warning|
notification|normal|debugging]
Step 8
Switch(cfg-call-home-profile)#
subscribe-to-alert-group inventory
[periodic {daily hh:mm | monthly date hh:mm |
weekly day hh:mm}]
OL-25340-01
Purpose
Enters configuration mode.
Enters Call Home configuration submode.
Enables the specified alert group. Use the
keyword all to enable all alert groups. By
default, all alert groups are enabled.
Enters the Call Home destination profile
configuration submode for the specified
destination profile.
Subscribes this destination profile to the
Configuration alert group. The Configuration
alert group can be configured for periodic
notification, as described in the
Periodic Notification" section on page
Subscribes to all available alert groups.
Subscribes this destination profile to the
Diagnostic alert group. The Diagnostic alert
group can be configured to filter messages based
on severity, as described in the
Message Severity Threshold" section on
page
Subscribes this destination profile to the
Environment alert group. The Environment alert
group can be configured to filter messages based
on severity, as described in the
Message Severity Threshold" section on
page
Subscribes this destination profile to the
Inventory alert group. The Inventory alert group
can be configured for periodic notification, as
described in the
Notification" section on page
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
Configuring Call Home
65-8.
65-8.
"Configuring Periodic
65-8.
"Configuring
65-8.
"Configuring
"Configuring
65-7
- Quick Links:
- Resetting a Switch to Factory Default...
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
