Table of Contents
Advertisement
Functional Overview of CIF
The following list gives an overview over the CIF's functionality:
• 78 MHz system clock
• 78 MHz sensor clock
• 78 MHz JPEG encoder clock
• 32-bit AHB slave programming interface
• ITU-R BT 601 compliant video interface supporting YC
• ITU-R BT 656 compliant video interface supporting YC
• 8-bit camera interface
• 12-bit resolution per color component internally
• YC
C
4:2:2 processing
b
r
• Hardware JPEG encoder incl JFIF1 02 stream generator and programmable quantization and Huffman
• Hardware JPEG encoder incl. JFIF1.02 stream generator and programmable quantization and Huffman
tables
• Windowing and frame synchronization
• Continuous resize support
• Frame skip support for video (e.g. MPEG-4) encoding
• Macro block line, frame end, capture error, data loss interrupts and sync. (h_start, v_start) interrupts
• Programmable polarity for synchronization signals
• Luminance/chrominance and chrominance blue/red swapping for YUV input signals
• Maximum input resolution of 3 Mpixels (2048x1536 pixels)
• Main scaler with pixel-accurate up- and down-scaling to any resolution between 3 MP (2048x1536) and
32x16
• pixel in processing mode
• Buffer in system memory organized as ring-buffer
• Buffer overflow protection for raw data and JPEG files
• Asynchronous reset input, software reset for the entire IP and separate software resets for all sub-modules
• Interconnect test support
• Semi planar storage format
• Color processing (contrast, saturation, brightness, hue)
Color processing (contrast, saturation, brightness, hue)
• Power management by software controlled clock disabling of currently not needed sub-modules
LGE Internal Use Only
3. TECHNICAL BRIEF
C
b
r
C
data
b
r
- 58 -
Copyright © 01 LG Electronics. Inc. All right reserved.
3. TECHNICAL BRIEF
Only for training and service purposes
Advertisement
Table of Contents
Troubleshooting
