Led Indicators For The Eight-Port Cesm; Table 4-3 Led Indicators For Eight-Port Cesm - Cisco MGX 8850 Installation And Configuration Manual
Multiservice switch
Hide thumbs
Also See for MGX 8850:
- Command reference manual (786 pages) ,
- Product manual (62 pages) ,
- Installation and configuration manual (4 pages)
Table of Contents
Advertisement
Circuit Emulation Service Module
LED Indicators for the Eight-Port CESM
The description of the LEDs on the eight-port CESM front card appear in Table 4-3.
Table 4-3
Type of LED
PORT LED
ACTIVE LED
STANDBY LED
FAIL LED
4-46
Cisco MGX 8850 Installation and Configuration, Release 1.1.10, Part Number 78-6186-03
LED Indicators for Eight-Port CESM
Color
Green
Red
Green
Yellow
Red
Meaning
Green indicates the port is active.
Red indicates there is local alarm on the port.
Off indicates the port has not been activated (upped).
On indicates the card set is in active mode.
Slow blink without the Active LED indicates the card is
in the boot state
.
Fast blink with the Standby LED indicates the card is
being downloaded
.
Fast blink indicates the service module is passing BRAM
channel information to the PXM
Steady yellow indicates the card is in Standby mode and
the firmware is executing ADMIN code
Steady Red with Active and Standby LEDs off indicates either
the card is in the Reset condition, the card has failed, or the
card set is not complete (no line module).
Steady Red with Active LED on indicates the card was active
prior to failing.
Steady Red with Standby LED on indicates the card was
standby prior to failing.
Both standby and red LED lit indicates self test failure
.
.
Advertisement
Table of Contents
