Verifying The Connectivity; Configuring Ioa Site On Switch; Configuring Ioa Cluster Cltr1 On Switch; Changing The Node To Use Ipfc Interface Address - Cisco MDS 9000 series Configuration Manual
I/o accelerator
Hide thumbs
Also See for MDS 9000 series:
- Command reference manual (1464 pages) ,
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages)
Table of Contents
Advertisement
Chapter 2
Getting Started
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
MTU 1500 bytes, BW 1000000 Kbit
675 packets input, 124613 bytes, 0 errors, 36 multicast
755 packets output, 111785 bytes, 0 errors, 0 dropped
sw-231-19#
Verifying the Connectivity
The following example verifies the connectivity using ping command:
sw-231-14# ping 10.1.1.2
PING 10.1.1.2 (10.1.1.2) 56(84) bytes of data.
64 bytes from 10.1.1.2: icmp_seq=1 ttl=64 time=0.868 ms
64 bytes from 10.1.1.2: icmp_seq=2 ttl=64 time=0.898 ms
64 bytes from 10.1.1.2: icmp_seq=3 ttl=64 time=0.906 ms
--- 10.1.1.2 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2017ms
rtt min/avg/max/mdev = 0.868/0.890/0.906/0.038 ms
sw-231-14#
Configuring IOA Site on Switch sw-231-14
The following example configures IOA site on switch sw-231-14:
sw-231-14(config)# ioa site-local site2
sw-231-14(config)#
Configuring IOA Site on Switch sw-231-19
The following example configures IOA site on switch sw-231-19:
sw-231-19(config)# ioa site-local site1
sw-231-19(config)#
Configuring IOA Cluster cltr1 on Switch sw-231-14
The following example configures IOA cluster ctrl1 on switch sw-231-14:
sw-231-14(config)# ioa cluster
2011 Apr
Master of cluster 0x2e05000dec18a133 of 1 nodes
2011 Apr
now has quorum with 1 nodes
Changing the Node to Use IPFC Interface Address
The following example force the node to use IPFC interface addresss:
sw-231-14(config-ioa-cl)# node sw-231-14 ip-address 10.1.1.1
sw-231-14(config-ioa-cl-node)# ex
Adding a Remote Node to the IOA Cluster
The following example adds a remote node to IOA cluster:
sw-231-14(config-ioa-cl)# node sw-231-19 ip-address 10.1.1.2
OL-20708-01, Cisco MDS NX-OS Release 5.0(1a)
cltr1
8 05:00:46 sw-231-14 %CLUSTER-2-CLUSTER_LEADER_ANNOUNCE: Node 0x1 is the new
8 05:00:46 sw-231-14 %CLUSTER-2-CLUSTER_QUORUM_GAIN: Cluster 0x2e05000dec18a133
Cisco MDS 9000 Family I/O Accelerator Configuration Guide
Using IOA Cluster with IPFC Interface
2-11
Advertisement
Table of Contents
