Using IOA Cluster with IPFC Interface
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
2011 Apr
now has quorum with 1 nodes
2011 Apr
now has quorum with 2 nodes
sw-231-14(config-ioa-cl-node)# ex
Adding an IOA Interface to the Switch sw-231-14
The following example adds an IOA interface on the switch sw-231-14:
sw-231-14(config-ioa-cl)# node sw-231-14
sw-231-14(config-ioa-cl-node)# int ioa 1/1
sw-231-14(config-ioa-cl-node)# int ioa 1/2
sw-231-14(config-ioa-cl-node)# ex
Adding an IOA Interface to the Switch sw-231-19
The following example adds an IOA interface on the switch sw-231-19:
sw-231-14(config-ioa-cl)# node sw-231-19
sw-231-14(config-ioa-cl-node)# int ioa 4/1
sw-231-14(config-ioa-cl-node)# int ioa 4/2
sw-231-14(config-ioa-cl-node)# ex
Verifying the Cluster Configuration
The following example verifies the cluster configuration using show cluster name node summary
command:
sw-231-14# show ioa cluster cltr1 node summary
-------------------------------------------------------------------------------
Switch
-------------------------------------------------------------------------------
sw-231-14(L)
sw-231-19
Verifying the IP Address
The following example verifies the IP Address that is configured on the switch using show ioa cluster
cluster name node command:
sw-231-14# show ioa cluster
Node sw-231-14 is local switch
Node ID is 1
IP address is 10.1.1.1
Status is online
Belongs to Site site2
Node is the master switch
Node sw-231-19 is remote switch
Node ID is 2
IP address is 10.1.1.2
Status is online
Belongs to Site site1
Node is not master switch
Cisco MDS 9000 Family I/O Accelerator Configuration Guide
2-12
8 05:02:47 sw-231-14 %CLUSTER-2-CLUSTER_QUORUM_GAIN: Cluster 0x2e05000dec18a133
8 05:02:52 sw-231-14 %CLUSTER-2-CLUSTER_QUORUM_GAIN: Cluster 0x2e05000dec18a133
Site
site2
site1
cltr1 node
Status
Master
online
yes
online
no
OL-20708-01, Cisco MDS NX-OS Release 5.0(1a)
Chapter 2
Getting Started
Node ID
1
2