Table of Contents
Advertisement
Before using for the first time
en
KBefore using for the first
time
Please read the following information before using the
t h e f i r s t t i m e
B e f o r e u s i n g f o r
appliance for the first time:
Clean the appliance and all accessory parts thoroughly.
Before you can use your new appliance, you must apply
certain settings.
Initial use
When it is delivered, the appliance is preset to air
Note:
recirculation mode.
Possible settings:
In air recirculation mode, if
■
value
‹
(factory setting) is set.
In air extraction mode, if
■
is set.
‚
Switching over the display for exhaust air mode
For air extraction mode, the electronic controller's
display must be switched accordingly to the basic
settings.
Check whether the appliance is connected and
1.
switched off.
Switch on the appliance.
2.
Within ten seconds, touch and hold the
3.
for approximately four seconds.
The first four displays provide product information.
Touch the settings area to view the individual
displays.
Product information
After-sales service index (ASSI)
Production number
Production number 1
Production number 2
Touching the
symbol again takes you to the basic
0
4.
settings.
and
light up as a presetting in the displays.
™‚
‹
Touch the
symbol repeatedly until
0
5.
displayed.
14
is displayed, the
'‚ˆ
is displayed, the value
'‚ˆ
symbol
0
Display screen
‹‚
"š
Š†
.
‹
.
†
is
™‚ˆ
Select the setting
‚
6.
Touch the
symbol for at least 4 seconds.
0
7.
This will save the settings.
Use the main switch in order to exit the basic
8.
settings.
The display of the electronic controller is switched to air
extraction mode.
Switching over the display for circulating-air mode
When it is delivered, the appliance is set to air
recirculation mode.
If the settings have been changed, proceed as follows
to set the display for the electronic controller in the
basic settings for air recirculation mode.
Check whether the appliance is connected and
1.
switched off.
Switch on the appliance.
2.
Within ten seconds, touch and hold the
3.
for approximately four seconds.
The first four displays provide product information.
Touch the settings area to view the individual
displays.
Product information
After-sales service index (ASSI)
Production number
Production number 1
Production number 2
Touching the
symbol again takes you to the basic
0
4.
settings.
and
light up as a presetting in the displays.
™‚
‹
Touch the
symbol repeatedly until
0
5.
displayed.
in the control panel.
symbol
0
Display screen
‹‚
"š
Š†
.
‹
.
†
is
™‚ˆ
Hide quick links:
Advertisement
Table of Contents
