Show Platform Ip Igmp Snooping - Cisco Catalyst 3750 Metro Command Reference Manual

Hide thumbs Also See for Catalyst 3750 Metro:

Table of Contents

show platform ip igmp snooping

Use the show platform ip igmp snooping privileged EXEC command to display platform-dependent

Internet Group Management Protocol (IGMP) snooping information.

Syntax Description

control [di]

flood [vlan vlan-id]

group ip-address

retry [count | local

remote [count]

Command Modes

Privileged EXEC

Command History

Usage Guidelines

You should use this command only when you are working directly with a technical support representative

while troubleshooting a problem. Do not use this command unless a technical support representative asks

you to do so.

Catalyst 3750 Metro Switch Command Reference

show platform ip igmp snooping {all | control [di] | counters | flood [vlan vlan-id] | group

ip-address | hardware | retry [count | local [count] | remote [count]]}

Display all IGMP snooping platform IP multicast information.

Display IGMP snooping control entries. The keyword has this meaning:

di—(Optional) Display IGMP snooping control destination index

Display IGMP snooping counters.

Display IGMP snooping flood information. The keyword has this meaning:

vlan vlan-id—(Optional) Display flood information for the specified

VLAN. The range is 1 to 4094.

Display the IGMP snooping multicast group information, where ip-address is

the IP address of the group.

Display IGMP snooping information loaded into hardware.

Display IGMP snooping retry information. The keywords have these

count—(Optional) Display only the retry count.

local—(Optional) Display local retry entries.

Display remote entries. The keyword has this meaning:

count—(Optional) Display only the remote count.

Modification

This command was introduced.

Catalyst 3750 Metro Switch Show Platform Commands