Monitoring Wireless Copp - Cisco Catalyst 4500 Series Software Configuration Manual
Cisco ios xe release 3.9.xe and cisco ios release 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages) ,
- Command reference manual (1230 pages)
Table of Contents
Advertisement
Monitoring Wireless CoPP
10 permit udp any eq bootps any eq bootps Extended IP access list
system-cpp-igmp
10 permit igmp any 224.0.0.0 31.255.255.255 Extended IP access list
system-cpp-ip-mcast-linklocal
10 permit ip any 224.0.0.0 0.0.0.255 Extended IP access list
system-cpp-ospf
10 permit ospf any 224.0.0.0 0.0.0.255 Extended IP access list
system-cpp-pim
10 permit pim any 224.0.0.0 0.0.0.255 Extended IP access list
system-cpp-ripv2
10 permit ip any host 224.0.0.9
Extended MAC access list system-cpp-bpdu-range
permit any 0180.c200.0000 0000.0000.000f Extended MAC access list
system-cpp-cdp
permit any host 0100.0ccc.cccc
Extended MAC access list system-cpp-cgmp
permit any host 0100.0cdd.dddd
Extended MAC access list system-cpp-dot1x
permit any host 0180.c200.0003
system-cpp-sstp
permit any host 0100.0ccc.cccd
To display one CoPP access list, enter the show access-lists system-cpp-cdp command:
Switch# show access-list system-cpp-cdp
Extended MAC access list system-cpp-cdp
permit any host 0100.0ccc.cccc
Switch#
Monitoring Wireless CoPP
You can enter the show policy-map control-plane-wireless command to develop site-specific policies,
to monitor statistics for the wireless control plane policy, and to troubleshoot wireless CoPP. This
command displays dynamic information about the actual policy applied, including rate information and
the number of bytes (and packets) that conformed or exceeded the configured policies in hardware.
"Class map statistics" is not supported for control-plane-wireless policy. Only policer statistics is
supported.
The output of the show policy-map control-plane-wireless command is similar to the following:
Switch# show policy-map control-plane-wireless
Wireless Control Plane
Service-policy input: system-wireless-cpp-policy
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
57-12
Class-map: system-cpp-arp (match-all)
0 packets
Match: protocol arp
police:
cir 64000 bps, bc 2000 bytes
conformed 0 bytes; actions:
transmit
exceeded 0 bytes; actions:
drop
conformed 0000 bps, exceeded 0000 bps
Class-map: system-cpp-capwap-ctrl (match-all)
0 packets
Match: protocol capwap-ctrl
police:
cir 64000 bps, bc 2000 bytes
Chapter 57
Configuring Control Plane Policing and Layer 2 Control Packet QoS
Advertisement
Chapters
Table of Contents
Troubleshooting
