How To Configure Auto Identity - Cisco Catalyst 2960 series Configuration Manual
Consolidated platform configuration guide, ios release 15.2(4)e
Hide thumbs
Also See for Catalyst 2960 series:
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages) ,
- Configuration manual (120 pages)
Table of Contents
Advertisement
How to Configure Auto Identity
Configuring Auto Identity Globally
SUMMARY STEPS
1. enable
2. configure terminal
3. sourcetemplate {AI_GLOBAL_CONFIG_TEMPLATE | template-name}
4. aaa new-model
5. radius server name
6. address ipv4 {hostname | ipv4-address}
7. key ipv4 {0 string | 7 string} string
8. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2
configure terminal
Example:
Switch# configure terminal
Step 3
sourcetemplate
{AI_GLOBAL_CONFIG_TEMPLATE |
template-name}
Example:
Switch(config)# source template
AI_GLOBAL_CONFIG_TEMPLATE
Step 4
aaa new-model
Example:
Switch(config)# aaa new-model
Step 5
radius server name
Example:
Switch(config)# radius server ISE
Purpose
Enables privileged EXEC mode.
Enters global configuration mode.
Configures an auto identity template.
Enables the authentication, authorization, and accounting (AAA)
access control mode.
Specifies the name for the RADIUS server configuration for
Protected Access Credential (PAC) provisioning and enters
RADIUS server configuration mode.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
• Enter your password if prompted.
• AI_GLOBAL_CONFIG_TEMPLATE is a built-in
template.
• template-name is a user-defined template.
Auto Identity
1457
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
