Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual
Consolidated platform configuration guide, ios release 15.2(4)e
Hide thumbs
Also See for Catalyst 2960 series:
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages) ,
- Configuration manual (120 pages)
Table of Contents
Advertisement
lib2.tcl
Example:
proc test3 {} {
puts "In procedure test3"
}
Step 2
tclsh
Use this command to enter the Tcl shell.
Example:
workstation% tclsh
Step 3
auto_mkindex directory_name *.tcl
Use the auto_mkindex command to create the tclIndex file. The tclIndex file that contains a directory of all the procedures
contained in the Tcl library files. We recommend that you run auto_mkindex inside a directory because there can only
be a single tclIndex file in any directory and you may have other Tcl files to be grouped together. Running auto_mkindex
in a directory determines which tcl source file or files are indexed using a specific tclIndex.
Example:
workstation% auto_mkindex eem_library *.tcl
The following example TclIndex is created when the lib1.tcl and lib2.tcl files are in a library file directory and the
auto_mkindex command is run.
tclIndex
Example:
# Tcl autoload index file, version 2.0
# This file is generated by the "auto_mkindex" command
# and sourced to set up indexing information for one or
# more commands.
# sets an element in the auto_index array, where the
# element name is the name of a command and the value is
# a script that loads the command.
set auto_index(test1) [list source [file join $dir lib1.tcl]]
set auto_index(test2) [list source [file join $dir lib1.tcl]]
set auto_index(test3) [list source [file join $dir lib2.tcl]]
Step 4
Copy the Tcl library files from
User Tcl Library Index
Step 5
Copy a user-defined EEM policy file written in Tcl to the directory used for storing user-defined EEM policies on the
target device. The directory can be the same directory used in
The directory for storing user-defined EEM policies can be the same directory used in
Index. The following example user-defined EEM policy can be used to test the Tcl library support in EEM.
libtest.tcl
Example:
::cisco::eem::event_register_none
Typically each line is a command that
Creating an EEM User Tcl Library Index
to the directory used for storing user library files on the target device.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Write Embedded Event Manager Policies Using Tcl
and the tclIndex file from
Creating an EEM User Tcl Library
Creating an EEM User Tcl Library
Creating an EEM
Index.
1797
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
