Reconfirming Vlan Memberships - Cisco Catalyst 2960 series Configuration Manual
Consolidated platform configuration guide, ios release 15.2(4)e
Hide thumbs
Also See for Catalyst 2960 series:
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages) ,
- Configuration manual (120 pages)
Table of Contents
Advertisement
How to Configure VMPS
Reconfirming VLAN Memberships
This task confirms the dynamic-access port VLAN membership assignments that the switch has received from
the VMPS.
SUMMARY STEPS
1. enable
2. vmps reconfirm
3. show vmps
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2
vmps reconfirm
Example:
Switch# vmps reconfirm
Step 3
show vmps
Example:
Switch# show vmps
Changing the Reconfirmation Interval
VMPS clients periodically reconfirm the VLAN membership information received from the VMPS. You can
set the number of minutes after which reconfirmation occurs.
If you are configuring a member switch in a cluster, this parameter must be equal to or greater than the
Note
reconfirmation setting on the command switch. You also must first use the rcommand privileged EXEC
command to log in to the member switch.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
2158
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Reconfirms dynamic-access port VLAN membership.
Verifies the dynamic VLAN reconfirmation status.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
