Configuring Mac Address Move Notification Traps - Cisco Catalyst 2960 series Configuration Manual
Consolidated platform configuration guide, ios release 15.2(4)e
Hide thumbs
Also See for Catalyst 2960 series:
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages) ,
- Configuration manual (120 pages)
Table of Contents
Advertisement
How to Administer the Switch
Command or Action
Step 10
show running-config
Example:
Switch# show running-config
Step 11
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Configuring MAC Address Move Notification Traps
When you configure MAC-move notification, an SNMP notification is generated and sent to the network
management system whenever a MAC address moves from one port to another within the same VLAN.
Follow these steps to configure the switch to send MAC address-move notification traps to an NMS host:
SUMMARY STEPS
1. enable
2. configure terminal
3. snmp-server host host-addr {traps | informs} {version {1 | 2c | 3}} community-string notification-type
4. snmp-server enable traps mac-notification move
5. mac address-table notification mac-move
6. end
7. show running-config
8. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1546
Purpose
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Purpose
Enables privileged EXEC mode. Enter your password if prompted.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
