Cables And Adapters; Sfp Module Cables; Console Port Adapter Pinouts - Cisco IE 4010 Hardware Installation Manual
Hide thumbs
Also See for IE 4010:
- Software configuration manual (1066 pages) ,
- Product documentation (28 pages) ,
- Hardware installation manual (86 pages)
Table of Contents
Advertisement
Cable and Connectors
Cables and Adapters
Figure 40
Alarm Port Details
Cables and Adapters
SFP Module Cables, page 55
Console Port Adapter Pinouts, page 55
SFP Module Cables
Each port must match the wave-length specifications on each end of the cable, and for reliable communications, the
cable must not exceed the allowable length.
For more information about SFP/SFP+ modules and cables, see
Console Port Adapter Pinouts
The console port uses an 8-pin RJ-45 connector. If you did not order a console cable, you need to provide an
RJ-45-to-DB-9 adapter cable to connect the switch console port to a PC console port. You need to provide an
RJ-45-to-DB-25 female DTE adapter if you want to connect the switch console port to a terminal. You can order an
adapter (part number ACS-DSBUASYN=).
Table 11 on page 56
lists the pinouts for the console port, the RJ-45-to-DB-9 adapter cable, and the console device.
Transceiver
Modules.
55
Hide quick links:
Advertisement
Table of Contents
