Configuring Pim; Finding Feature Information; Prerequisites For Pim - Cisco Catalyst 3850 series Configuration Manual
Ip multicast routing configuration guide
Hide thumbs
Also See for Catalyst 3850 series:
- Configuration manual (58 pages) ,
- Hardware installation manual (146 pages)
Table of Contents
Advertisement
Configuring PIM
•
•
•
•
•
•
•
•
•
•
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Prerequisites for PIM
• Before you begin the PIM configuration process, decide which PIM mode to use. This is based on the
OL-32598-01
Finding Feature Information, page 121
Prerequisites for PIM, page 121
Restrictions for PIM, page 122
Information About PIM, page 125
How to Configure PIM, page 141
Verifying PIM Operations, page 171
Monitoring and Troubleshooting PIM, page 179
Configuration Examples for PIM, page 181
Additional References, page 185
Feature History and Information for PIM, page 187
Bug Search Tool
applications you intend to support on your network. Use the following guidelines:
◦ In general, if the application is one-to-many or many-to-many in nature, then PIM-SM can be used
successfully.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
C H A P T E R
and the release notes for your platform and software release. To
7
121
- Quick Links:
- Prerequisites for Using the Web Gui
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
