Configuring Pim; Finding Feature Information; Prerequisites For Configuring Pim; Prerequisites For Configuring Pim Stub Routing - Cisco Catalyst 2960-XR Configuration Manuals
Ip multicast routing
Hide thumbs
Also See for Catalyst 2960-XR:
- Security configuration manual (404 pages) ,
- Configuration manual (196 pages) ,
- Reference (52 pages)
Table of Contents
Advertisement
Configuring PIM
•
•
•
•
•
•
•
•
•
•
•
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for Configuring PIM
Prerequisites for Configuring PIM Stub Routing
The PIM stub routing feature supports multicast routing between the distribution layer and the access layer.
It supports two types of PIM interfaces, uplink PIM interfaces, and PIM passive interfaces. A routed interface
OL-29426-01
Finding Feature Information, page 35
Prerequisites for Configuring PIM, page 35
Restrictions for PIM, page 36
Information About PIM, page 37
How to Configure PIM, page 45
Monitoring PIM , page 69
Troubleshooting PIMv1 and PIMv2 Interoperability Problems, page 70
Configuration Examples for PIM, page 71
Where to Go Next, page 74
Additional References, page 74
Feature History and Information for PIM, page 75
Catalyst 2960-XR Switch IP Multicast Routing Configuration Guide, Cisco IOS Release 15.0(2)EX1
4
C H A P T E R
35
Advertisement
Table of Contents
