How To Configure Basic Ip Multicast Routing; Configuring Basic Ip Multicast Routing - Cisco Catalyst 2960-XR Configuration Manuals
Ip multicast routing
Hide thumbs
Also See for Catalyst 2960-XR:
- Security configuration manual (404 pages) ,
- Configuration manual (196 pages) ,
- Reference (52 pages)
Table of Contents
Advertisement
How to Configure Basic IP Multicast Routing
Feature
Candidate RPs
Shortest-path tree threshold rate
PIM router query message interval
How to Configure Basic IP Multicast Routing
Configuring Basic IP Multicast Routing
By default, multicast routing is disabled, and there is no default mode setting.
This procedure is required.
SUMMARY STEPS
1. configure terminal
2. ip multicast-routing distributed
3. interface interface-id
4. ip pim version [1 | 2]
5. ip pim {dense-mode | sparse-mode | sparse-dense-mode}
6. end
7. show running-config
8. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2
ip multicast-routing distributed
Example:
Switch(config)# ip
multicast-routing distributed
Catalyst 2960-XR Switch IP Multicast Routing Configuration Guide, Cisco IOS Release 15.0(2)EX1
96
Default Setting
Disabled.
0 kb/s.
30 seconds.
Purpose
Enters the global configuration mode.
Enables IP multicast distributed switching
Note
To disable multicasting, use the no ip multicast-routing
distributed global configuration command.
Configuring IP Multicast Routing
OL-29426-01
Advertisement
Table of Contents
