Persistent Fc Id Configuration Guidelines; Configuring Persistent Fc Ids - Cisco Nexus 6000 Series Configuration Manual
Hide thumbs
Also See for Nexus 6000 Series:
- Installation manual (86 pages) ,
- Reference manual (12 pages) ,
- Configuration manual (232 pages)
Table of Contents
Advertisement
Configuring Fibre Channel Domain Parameters
Step 3
Persistent FC ID Configuration Guidelines
When the persistent FC ID feature is enabled, you can enter the persistent FC ID submode and add static or
dynamic entries in the FC ID database. By default, all added entries are static. Persistent FC IDs are configured
on a per-VSAN basis.
When manually configuring a persistent FC ID, follow these requirements:
• Ensure that the persistent FC ID feature is enabled in the required VSAN.
• Ensure that the required VSAN is an active VSAN. Persistent FC IDs can only be configured on active
VSANs.
• Verify that the domain part of the FC ID is the same as the runtime domain ID in the required VSAN.
If the software detects a domain mismatch, the command is rejected.
• Verify that the port field of the FC ID is 0 (zero) when configuring an area.
Configuring Persistent FC IDs
You can configure persistent FC IDs.
Procedure
Step 1
Step 2
Step 3
OL-27932-01
Command or Action
no fcdomain fcid persistent vsan vsan-id
Example:
switch(config)# no fcdomain fcid persistent
vsan 33
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
fcdomain fcid database
Example:
switch(config)# fcdomain fcid database
vsan vsan-id wwn 33:e8:00:05:30:00:16:df
fcid fcid
Example:
switch(config-fcid-db)# vsan 26 wwn
33:e8:00:05:30:00:16:df fcid 4
Cisco Nexus 6000 Series NX-OS SAN Switching Configuration Guide, Release 6.x
Purpose
Disables the FC ID persistency feature in
the specified VSAN.
Purpose
Enters global configuration mode.
Enters FC ID database configuration submode.
Configures a device WWN
(33:e8:00:05:30:00:16:df) with the FC ID 0x070128
in the specified VSAN.
FC IDs
21
Advertisement
Table of Contents
