Ingress Queuing Support - Cisco ASR 9000 Series Configuration Manual
Aggregation services router modular quality of service
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Configuring Modular QoS Service Packet Classification
Command or Action
Step 5
exit
Example:
RP/0/RSP0/CPU0:router(config-pmap)# exit
Step 6
end-policy-map
Example:
RP/0/RSP0/CPU0:router(config-pmap)# end-policy-map
Step 7
interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)# interface
TenGigabitEthernet 0/1/0/0.1
Step 8
service-policy output policy-map
Example:
RP/0/RSP0/CPU0:router(config-satellite-fabric-link)#
service-policy output icl_ps
Step 9
commit
Ingress Queuing Support
Ingress queuing is disabled for some line cards.
The tables below list out the ingress queuing support for fixed port and modular line cards.
Ingress queuing is not supported on ASR9K-SIP-700 line cards.
Note
Fixed port Line Card
LC type
A9K-24x10GE-SE
A9K-24x10GE-TR
A9K-36x10GE-SE
A9K-36x10GE-TR
A9K-2x100GE-SE
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide, Release 6.1.x
Ingress Queuing Support
Purpose
Returns the router to policy map configuration mode.
Ends the policy map configuration.
Configures an interface and enters the sub-interface
configuration mode.
Attaches a policy map to an output interface to be
used as the service policy for the ICL interface.
Ingress Queuing Support
Yes
Yes
No
No
No
129
Advertisement
Chapters
Table of Contents
