Table of Contents
Advertisement
Feature
Show Calling ID and Calling Number
Show Duration for Call History
Speed Dial
Time Zone Update
Transfer
Voice Message System
Web Access Enable by Default
Feature Buttons and Softkeys
The following table provides information about features that are available on softkeys, features that are
available on dedicated feature buttons, and features that you need to configure as programmable feature
buttons. An "X" in the table indicates that the feature is supported for the corresponding button type or softkey.
Of the two button types and softkeys, only programmable feature buttons require configuration in Cisco IP
Phone administration.
Table 11: Features with Corresponding Buttons and Softkeys
Feature Name
Answer
Call Forward All
Description and More Information
The phones can display both the calling ID and calling number for incoming calls. The
IP phone LCD display size limits the length of the calling ID and the calling number that
display.
The Show Calling ID and Calling Number feature applies to the incoming call alert only
and does not change the function of the Call Forward and Hunt Group features.
See "Caller ID" in this table.
Displays the time duration of placed and received calls in the Call History details.
If the duration is greater than or equal to one hour, the time is displayed in the Hour,
Minute, Second (HH:MM:SS) format.
If the duration is less than one hour, the time is displayed in the Minute, Second (MM:SS)
format.
If the duration is less than one minute, the time is displayed in the Second (SS) format.
Dials a specified number that has been previously stored.
Updates the Cisco IP Phone with time zone changes.
Allows users to redirect connected calls from their phones to another number.
Some JTAPI/TAPI applications are not compatible with the Join and Direct Transfer
feature implementation on the Cisco IP Phone and you may need to configure the Join
and Direct Transfer Policy to disable join and direct transfer on the same line or possibly
across lines.
Enables callers to leave messages if calls are unanswered.
Web services are enabled by default.
Dedicated Feature
Button
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
Feature Buttons and Softkeys
Programmable Feature
Button
X
X
Softkey
X
X
107
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
