Configuring Qos Port-Based Settings - Cisco RV215W Administration Manual
Wireless-n vpn firewall
Hide thumbs
Also See for RV215W:
- Administration manual (149 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Configuring Quality of Service (QoS)
Configuring QoS Port-Based Settings
Configuring QoS Port-Based Settings
STEP 1
STEP 2
STEP 3
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Draft Version 1—Cisco Confidential
You can configure QoS settings for every LAN port on the Cisco RV215W. The
supports 4 priority queues that allow for traffic prioritization per physical switch
port.
To configure QoS settings for the Cisco RV215W LAN ports:
Choose QoS > QoS Port-Based Settings.
For each port in the QoS Port-Based Settings Table, enter this information:
Trust Mode
Default Traffic
Forwarding Queue for
Untrusted Devices
Click Save.
To restore the default port-based QoS settings, click Restore Default. Then, click
Save.
Choose one of the following options from the drop-
down menu:
•
Port—This setting enables the port based
on QoS. You can then set the traffic priority
for a particular port. The traffic queue
priority starts at the lowest priority of 1 and
ends with the highest priority of 4.
•
DSCP—Differentiated Services Code Point
(DSCP). Enabling this feature prioritizes the
network traffic across the LAN based on the
DSCP queue mapping on the DSCP
Settings page.
•
CoS—Class of Service (CoS).
Choose a priority level for outbound traffic (1 to 4).
6
104
Advertisement
Table of Contents
