Table of Contents
Advertisement
dspimaalmparm
dspimaalmparm
Display IMA Alarm Parameters
There are two IMA alarm parameters. One parameter defines how long an IMA group must be down
before an alarm is generated. The other parameter defines how long a previously downed IMA group
must be up before another alarm reports that the group is back up. Use the dspimaalmparm command
to view the IMA alarm parameters for a specified IMA group.
Syntax
dspimaalmparm <group_num>
Syntax Description
group_num
Related Commands
cnfimaalmparm
Attributes
Log: No
Example
Display the configuration for IMA group 1 on the current card.
PXM1E_SJ.1.1.AUSMB8.a > dspimaalmparm 1
PXM1E_SJ.1.1.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-142
Enter the number for the IMA group you want to display. Use the dspimagrps
command to display the configured IMA groups.
State: Any
Group No.
---------
1
Privilege: Group 1
UpTime(msec).
-------
2500
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Chapter 4
AUSM Command Reference
DownTime(msec)
--------------
10000
Advertisement
Table of Contents
