Cisco Nexus 7000 Series Command Reference Manual page 532

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

match (class-map)

Command Default

Command Modes

Class map configuration

Command History

Usage Guidelines

You must create the IP ACLs or MAC ACLs before you reference them in this command.

You can use this command only in the default VDC.

This command does not require a license.

This example shows how to specify a match criteria for a control plane class map:

switch# configure terminal

switch(config)# class-map type control-plane ClassMapA

switch(config-pmap)# match exception ip icmp redirect

switch(config-pmap)# match redirect arp-inspect

This example shows how to remove a criteria for a control plane class map:

switch# configure terminal

switch(config)# class-map type control-plane ClassMapA

switch(config-pmap)# no match exception ip icmp redirect

Related Commands

class-map type control-plane

show class-map type control-plane

Cisco Nexus 7000 Series Security Command Reference

Modification

The unicast rpf-failure keywords were added.

Added support for policing IPv6 packets.

This command was introduced.

Creates or specifies a control plane class map and

enters class map configuration mode.

Displays configuration information for control plane

policy maps.