Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. SPECIFICATIONS Model: DCL181F Capacity 650 mL Continuous use HIGH Approx. 20 min (with battery BL1830B) Approx.
Page 3
SAVE THESE INSTRUCTIONS. — Wet dirt, water, oil or the like CAUTION: Only use genuine Makita batteries. — Hard pieces with sharp edges, such as wood chips, metals, stones, glasses, have been altered, may result in the battery bursting nails, pins or razors —...
FUNCTIONAL CAUTION: Always install the battery cartridge fully until the red indicator cannot be seen. If not, DESCRIPTION you or someone around you. CAUTION: Do not install the battery cartridge CAUTION: Always be sure that the tool is forcibly. If the cartridge does not slide in easily, it is switched off and the battery cartridge is removed not being inserted correctly.
Page 5
cate the remaining battery capacity. The indicator lamps light up for few seconds. Indicator lamps Remaining capacity Lighted Blinking 75% to 100% 50% to 75% 25% to 50% 1. OFF button 2. 3. Lamp 0% to 25% Charge the button. To turn off the lamp, press the "OFF" button. battery.
Page 6
Disposing of dust CAUTION: Empty the cleaner before it becomes too full, or the suction force weakens. CAUTION: Be sure to empty out the dust inside the cleaner itself. Failure to do so may damaged. capsule, tap the capsule 4 or 5 times with your hand. Now point suction inlet downwards, turn capsule in direction of arrow in diagram, and disconnect capsule slowly and straight.
Page 7
1. Capsule 2. 1. Filter NOTE: to unfasten securing lip from cleaner unit and then pull shown in diagram, dust will get into motor housing, and cause motor failure. unit. Reassembly unit. Connect capsule. Align O symbol on capsule with direction of arrow until it is secured.
Page 8
1. Filter state 1. Handle 2. Capsule NOTE: Always remove dust ahead of time, as suction 1. Filter power will be reduced if there is too much dust in cleaner. into groove of cleaner housing NOTE: If they are not loaded correctly, dust will get into the motor housing, and cause motor failure.
1. Handle 2. Capsule NOTE: Always remove dust ahead of time, as suction power will be reduced if there is too much dust in cleaner. NOTE: Always be sure to check that high perfor- If they are not loaded correctly, dust will get into the motor housing, and cause motor failure.
Page 10
Corner nozzle Fit on the corner nozzle for cleaning corners and crev- ices of a car or furniture. 1. Capsule Cleaning (Suction) 1. Corner nozzle 2. Cleaner body Nozzle Corner nozzle +Extension wand Attach the nozzle to clean off tables, desks, furniture, etc.
If you need any assistance for more details regard- OPTIONAL Center. ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool The use of any other accessories or attachments might present a risk of for its stated purpose. 11 ENGLISH...
Page 12
NOTE: tool package as standard accessories. They may differ from country to country. Jan-Baptist Vinkstraat 2, Makita Europe N.V. 3070 Kortenberg, Belgium 3-11-8, Sumiyoshi-cho, Makita Corporation Anjo, Aichi 446-8502 Japan 885580-221 www.makita.com 20161207...