Table of Contents
Advertisement
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
DETAILED STEPS
Command
Step 1
enable
Example:
Router> enable
Step 2
vlan database
Example:
Router# vlan database
Step 3
no vlan vlan_id
Example:
Router(vlan)# no vlan 1
Step 4
exit
Example:
Router(vlan)# exit
Verifying VLAN Deletion
You can verify that a VLAN has been deleted from the switch in VLAN database mode.
Use the show command in VLAN database mode to verify that a VLAN has been deleted from the
switch, as shown in the following output example:
Router(vlan)# show
VLAN ISL Id: 1
VLAN ISL Id: 1002
<output truncated>
Router(vlan)#
Name: default
Media Type: Ethernet
VLAN 802.10 Id: 100001
State: Operational
MTU: 1500
Translational Bridged VLAN: 1002
Translational Bridged VLAN: 1003
Name: fddi-default
Media Type: FDDI
VLAN 802.10 Id: 101002
State: Operational
MTU: 1500
Bridge Type: SRB
Translational Bridged VLAN: 1
Translational Bridged VLAN: 1003
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters VLAN configuration mode.
Deletes an Ethernet VLAN.
Updates the VLAN database, propagates it throughout the
administrative domain, and returns to privileged EXEC mode.
How to Configure EtherSwitch HWICs
Book Title
9
- Quick Links:
- Configuring Vlans
Hide quick links:
Advertisement
Chapters
Table of Contents
