Cisco 10000 Series Configuration Manual page 162
Router access network control protocol
Hide thumbs
Also See for 10000 Series:
- Configuration manual (854 pages) ,
- Troubleshooting manual (70 pages) ,
- Installation manual (14 pages)
Table of Contents
Advertisement
show atm pvc
Table 0-2
Field
Status
State
PPP
PPPoA Current State State of the PPPoA session associated with the VC.
PPPoA Latest Event The latest event that occurred on the PPPoA session associated with the VC.
PPPoA Latest Error The latest error that occurred on the PPPoA session associated with the VC.
PPPoA Session ID
PPPoA Handle
SSS Handle
Switch Handle
PPP Handle
AAA Unique ID
AIE Handle
Packets in VC Holdq Number of packets in the hold queue of the VC.
Particles in VC Tx
Ring
1. QoS = quality of service
2. AIS = alarm indication signal
3. RDI = remote defect identification
4. ILMI = Interim Local Management Interface
Cisco 10000 Series Router
The following example shows sample output from the show atm pvc interface atm interface-number
vpi/vci vaccess command. In the output, the vpi/vci vaccess option causes the name of all of the virtual
access interfaces (VAIs) to appear. These VAIs are associated with PVC 100/1000 on ATM subinterface
ATM 3/0/0.6.
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
A-30
show atm pvc Field Descriptions (continued)
Description
When the Status field indicates UP, the VC is established. When the Status field
indicates DOWN, refer to the State field for further information about the VC
state.
When the Status field is UP, this field does not appear. When the Status field is
DOWN or INACTIVE, the State field will appear with one of the following
values:
•
NOT_VERIFIED—The VC has been established successfully; waiting for
OAM (if enabled) and ILMI (if enabled) to verify that the VC is up.
NOT_EXIST—VC has not been created.
•
•
HASHING_IN—VC has been hashed into a hash table.
•
ESTABLISHING—Ready to establish VC connection.
•
MODIFYING—VC parameters have been modified.
•
DELETING—VC is being deleted.
DELETED—VC has been deleted.
•
NOT_IN_SERVICE—ATM interface is shut down.
•
For PPP over ATM, indicates the virtual access interface number and virtual
template number being used.
PPPoA session identifier of the PPPoA session associated with the VC.
PPPoA context handle.
SSS handle for PPPoA session associated with the VC.
SSS handle for switch management.
Handle associated with the PPP context.
Unique identifier associated with the AAA session.
Access IE handle for the PPPoA session.
Number of particles in the Tx ring of the VC.
Chapter A
ANCP Command Reference
OL-14660-03
Advertisement
Table of Contents
