Changing The Reconfirmation Interval - Cisco Catalyst 2960 series Configuration Manual
Vlan
Hide thumbs
Also See for Catalyst 2960 series:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
Changing the Reconfirmation Interval
DETAILED STEPS
Command or Action
Step 1
vmps reconfirm
Example:
Switch# vmps reconfirm
Step 2
show vmps
Example:
Switch# show vmps
Changing the Reconfirmation Interval
VMPS clients periodically reconfirm the VLAN membership information received from the VMPS. You can
set the number of minutes after which reconfirmation occurs.
If you are configuring a member switch in a cluster, this parameter must be equal to or greater than the
Note
reconfirmation setting on the command switch. You also must first use the rcommand privileged EXEC
command to log in to the member switch.
SUMMARY STEPS
1. configure terminal
2. vmps reconfirm minutes
3. end
4. show vmps
5. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Catalyst 2960-X Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX
88
Purpose
Reconfirms dynamic-access port VLAN membership.
Verifies the dynamic VLAN reconfirmation status.
Purpose
Enters the global configuration mode.
Configuring VMPS
OL-29065
- Quick Links:
- Configuring Vlans
Hide quick links:
Advertisement
Table of Contents
