Cisco 300 Series Administration Manual page 305
Managed switch
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Quick start manual (72 pages) ,
- Datasheet (14 pages)
Table of Contents
Advertisement
IP Configuration
IPv4 Management and Interfaces
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
UDP Relay/IP Helper
The UDP Relay/IP Helper feature is only available when the device is in Layer 3
system mode. Switches do not typically route IP Broadcast packets between IP
subnets. However, if this feature enables the device to relay specific UDP
Broadcast packets, received from its IPv4 interfaces, to specific destination IP
addresses.
To configure the relaying of UDP packets received from a specific IPv4 interface
with a specific destination UDP port, add a UDP Relay:
Click IP Configuration > IPv4 Management and Interfaces > UDP Relay/IP
Helper.
Click Add.
Select the Source IP Interface to where the device is to relay UDP Broadcast
packets based on a configured UDP destination port. The interface must be one of
the IPv4 interfaces configured on the device.
Enter the UDP Destination Port number for the packets that the device is to relay.
Select a well-known port from the drop-down list, or click the port radio button to
enter the number manually.
Enter the Destination IP Address that receives the UDP packet relays. If this field
is 0.0.0.0, UDP packets are discarded. If this field is 255.255.255.255, UDP packets
are flooded to all IP interfaces.
Click Apply. The UDP relay settings are written to the Running Configuration file.
DHCPv4 Snooping/Relay
DHCPv4 Snooping
DHCP snooping provides a security mechanism to prevent receiving false DHCP
response packets and to log DHCP addresses. It does this by treating ports on the
device as either trusted or untrusted.
A trusted port is a port that is connected to a DHCP server and is allowed to
assign DHCP addresses. DHCP messages received on trusted ports are allowed
to pass through the device.
17
279
Advertisement
Table of Contents
