Cisco 300 Series Administration Manual page 505

Managed switch

Hide thumbs Also See for 300 Series:

Table of Contents

Link Local—The IPv6 address uniquely identifies hosts on a single

network link. A link local address has a prefix of FE80, is not routable, and

can be used for communication only on the local network. Only one link

local address is supported. If a link local address exists on the interface,

this entry replaces the address in the configuration.

Global—The IPv6 address is a global Unicast IPV6 type that is visible and

reachable from other networks.

Link Local Interface—Select the link local interface from the list of

Server IP Address/Name—Enter either the IP address of the SSH server or

its name, depending on what was selected in Server Definition.

Username—This must match the username on the server.

Old Password—This must match the password on the server.

New Password—Enter the new password and confirm it in the Confirm

Password field.

Click Apply. The password on the SSH server is modified.

Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)

Security: SSH Client

SSH Client Configuration Through the GUI