Cisco 300 Series Administration Manual page 268
Managed switch
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Quick start manual (72 pages) ,
- Datasheet (14 pages)
Table of Contents
Advertisement
Spanning Tree
Defining MSTP Interface Settings
STEP 5
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
Enter the parameters.
•
Instance ID—Select the MST instance to be configured.
•
Interface—Select the interface for which the MSTI settings are to be
defined.
•
Interface Priority—Set the port priority for the specified interface and MST
instance.
•
Path Cost—Enter the port contribution to the root path cost in the User
Defined textbox or select Use Default to use the default value.
•
Port State—Displays the MSTP status of the specific port on a specific MST
instance. The parameters are defined as:
-
Disabled—STP is currently disabled.
-
Blocking—The port on this instance is currently blocked, and cannot
forward traffic (with the exception of BPDU data) or learn MAC
addresses.
-
Listening—The port on this instance is in Listening mode. The port cannot
forward traffic, and cannot learn MAC addresses.
-
Learning—The port on this instance is in Learning mode. The port cannot
forward traffic, but it can learn new MAC addresses.
-
Forwarding—The port on this instance is in Forwarding mode. The port
can forward traffic and learn new MAC addresses.
Boundary
-
—The port on this instance is a boundary port. It inherits its
state from instance 0 and can be viewed on the STP Interface Settings
page.
•
Port Role—Displays the port or LAG role, per port or LAG per instance,
assigned by the MSTP algorithm to provide STP paths:
-
Root—Forwarding packets through this interface provides the lowest
cost path for forwarding packets to the root device.
-
Designated—The interface through which the bridge is connected to the
LAN, which provides the lowest root path cost from the LAN to the Root
Bridge for the MST instance.
-
Alternate—The interface provides an alternate path to the root device
from the root interface.
14
243
Advertisement
Table of Contents
