Table of Contents
Advertisement
Appendix
A.3 RS-232 Connection
①
②
③
④
⑤
A.3
RS-232 Connection
The hardware and software requirements for programming the SITRANS F-1010 models
require a PC connected to the RS-232 serial port. The serial interface cable includes 9-pin
and 25-pin connectors to accommodate both types of IBM-compatible serial ports. A PC
communication program such as Si-Ware (download program at: http://s13.me/ns/cv) or
HyperTerminal (Windows 95/98/NT/2000/XP) serves as the data entry interface. These
programs reproduce the menu screens that would appear on the system's graphic screen.
Once the serial interface is established you can choose to program a graphic display system
using a PC and a communications program. However, note that the serial interface cable is
an option.
Note
You can use a DOS-based communications program also. Make sure that your PC is loading
the ANSI.SYS driver via your Config.sys file. Set the program's RS-232 parameters to match
those of the flow meter (see HyperTerminal example screen on the following pages).
202
Black
Orange
Red
Blue
⑥
Short Terminals 1 and 4 (For FUE1010 - TB2 is used for
another Temperature sensor.)
⑦
Ground Terminals 2 and 3 to Terminal 5
⑧
To Sensor
⑨
7ME39600CR (992EC) Series Cable
Operating Instructions, 01/2013, A5E02951520-AC
FUS1010 IP65 NEMA 4X & IP66 NEMA 7
- Quick Links:
- Sensor Installation
Hide quick links:
Advertisement
Table of Contents
