Associating Members With A Bridge Domain - Cisco ASR 9000 Series Configuration Manuallines

L2vpn and ethernet services configuration guide

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

Associating Members with a Bridge Domain

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-pw)#dhcp ipv4 snoop profile profile1

Enables DHCP snooping on the bridge, and attaches a DHCP snooping profile.

Use the commit or end command.

commit - Saves the configuration changes and remains within the configuration session.

end - Prompts user to take one of these actions:

• Yes - Saves configuration changes and exits the configuration session.

• No - Exits the configuration session without committing the configuration changes.

• Cancel - Remains in the configuration mode, without committing the configuration changes.

Associating Members with a Bridge Domain

After a bridge domain is created, perform this task to assign interfaces to the bridge domain. These types of

bridge ports are associated with a bridge domain:

• Ethernet and VLAN

SUMMARY STEPS

1. configure

3. bridge group bridge group name

4. bridge-domain bridge-domain name

5. interface type interface-path-id

6. (Optional) static-mac-address { MAC-address }

7. routed interface BVI-id

8. Use the commit or end command.

DETAILED STEPS

RP/0/RSP0/CPU0:router# configure

Enters the Global Configuration mode.

RP/0/RSP0/CPU0:router(config)# l2vpn

Enters L2VPN configuration mode.

L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x

Implementing Multipoint Layer 2 Services