Removing A Mac Acl; Applying A Mac Acl As A Port Acl - Cisco Nexus 9000 Series Configuration Manual
Nx-os security configuration guide, release 9.x
Hide thumbs
Also See for Nexus 9000 Series:
- Configuration manual (276 pages) ,
- Troubleshooting manual (126 pages) ,
- Quick start configuration manual (6 pages)
Table of Contents
Advertisement
Removing a MAC ACL
Removing a MAC ACL
You can remove a MAC ACL from the device.
SUMMARY STEPS
1. configure terminal
2. no mac access-list name
3. (Optional) show mac access-lists name summary
4. (Optional) copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
no mac access-list name
Example:
switch(config)# no mac access-list acl-mac-01
switch(config)#
Step 3
(Optional) show mac access-lists name summary
Example:
switch(config)# show mac access-lists acl-mac-01
summary
Step 4
(Optional) copy running-config startup-config
Example:
switch(config)# copy running-config startup-config
Applying a MAC ACL as a Port ACL
You can apply a MAC ACL as a port ACL to any of the following interface types:
• Layer 2 Ethernet interfaces
• Layer 2 port-channel interfaces
Before you begin
Ensure that the ACL that you want to apply exists and is configured to filter traffic in the manner that you
need for this application.
SUMMARY STEPS
1. configure terminal
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
290
Purpose
Enters global configuration mode.
Removes the MAC ACL that you specify by name from
the running configuration.
Displays the MAC ACL configuration. If the ACL remains
applied to an interface, the command lists the interfaces.
Copies the running configuration to the startup
configuration.
Configuring MAC ACLs
- Quick Links:
- Radius and Tacacs+ Security Protocols
Hide quick links:
Advertisement
Table of Contents
