Siemens SED2 series Operating Instructions Manual page 100
Variable speed drives
Hide thumbs
Also See for SED2 series:
- Commissioning manual (100 pages) ,
- Application manual (44 pages) ,
- Operating instructions manual (40 pages)
Table of Contents
Advertisement
P2221[2].
BI: Fixed PID setpoint select Bit 1, Bit 2, and Bit 3
P2222[2],
P2223[2]
Defines command source of fixed PID setpoint selection bit 1.
Unit: -
Min: 0:0
Settings:
722.0=Digital input 1 (requires P0701 set to 99, BICO)
722.1=Digital input 2 (requires P0702 set to 99, BICO)
722.2=Digital input 3 (requires P0703 set to 99, BICO)
722.3=Digital input 4 (requires P0704 set to 99, BICO)
722.4=Digital input 5 (requires P0705 set to 99, BICO)
722.5=Digital input 6 (requires P0706 set to 99, BICO)
Index:
For P2221:
P2221[0]: 1st command data set (CDS)
P2221[1]: 2nd command data set (CDS)
r2224
CO: Act. fixed PID setpoint
Displays total output of PID fixed setpoint selection.
Unit: %
Min: -
Note:
r2224=100 % corresponds to 4000 hex.
P2225, P2227
Fixed PID setpoint mode - Bit 4 and Bit 5
Direct selection or direct selection + ON Bit 4 for PID setpoint.
Unit: -
Min: 1
Settings:
1=Direct selection
P2226[2]-
BI: Fixed PID setpoint select Bit 4 and Bit 5
P2228[2]
P2226[2]
Min: 0:0
P2227
Min: 1
P2228[2]
Min: 0
Settings:
722.0=Digital input 1 (requires P0701 set to 99, BICO)
722.1=Digital input 2 (requires P0702 set to 99, BICO)
722.2=Digital input 3 (requires P0703 set to 99, BICO)
722.3=Digital input 4 (requires P0704 set to 99, BICO)
722.4=Digital input 5 (requires P0705 set to 99, BICO)
722.5=Digital input 6 (requires P0706 set to 99, BICO)
Index:
For P2226:
P2226[0]: 1st command data set (CDS)
P2226[1]: 2nd command data set (CDS)
P2231
Setpoint memory of PID-MOP
Setpoint memory.
Unit: -
Min: 0
Settings:
0=PID-MOP setpoint will not be stored
Dependency:
If 0 selected, setpoint returns to value set in P2240 (setpoint of PID-MOP) after an OFF command
If 1 is selected, active setpoint is 'remembered' and P2240 updated with current value.
Note:
See P2240 (setpoint of PID-MOP).
P2232
Inhibit rev. direct. of PID-MOP
Inhibits reverse setpoint selection when PID motor potentiometer is chosen either as a main
setpoint of additional setpoint (using P1000).
Unit: -
Min: 0
Details:
Inhibits reverse setpoint selection when PID motor potentiometer is chosen either as a main setpoint of additional
setpoint (using P1000)
Settings:
0=Reserve direction is allowed
Note:
Setting 0 enables a change of motor direction using the motor potentiometer setpoint (increase/decrease frequency
either by using digital inputs or motor potentiometer up/down buttons.
P2240[2]
Setpoint of PID-MOP
Setpoint of the motor potentiometer.
Allows user to set a digital PID setpoint in [%].
Unit: %
Min: -200.00
Settings:
722.0=Digital input 1 (requires P0701 set to 99, BICO)
722.1=Digital input 2 (requires P0702 set to 99, BICO)
722.2=Digital input 3 (requires P0703 set to 99, BICO)
722.3=Digital input 4 (requires P0704 set to 99, BICO)
722.4=Digital input 5 (requires P0705 set to 99, BICO)
722.5=Digital input 6 (requires P0706 set to 99, BICO)
722.6=Digital input 7 (via analog input 1, requires P0707 set to 99)
722.7=Digital input 8 (via analog input 2, requires P0708 set to 99)
19.D =Keypad UP cursor
Dependency:
To change setpoint:
1. Use UP / DOWN key on BOP or
2. Set P0702/P0703=13/14 (function of digital inputs 2 and 3)
Note:
P2240=100 % corresponds to 4000 hex.
r2250
CO: Output setpoint of PID-MOP
Displays output setpoint of motor potentiometer in [%].
100/126
Siemens Building Technologies
HVAC Products
Def: 0:0 (P2223[2]:722.3
For P2222:
P2222[0]: 1st command data set (CDS)
P2222[1]: 2nd command data set (CDS)
Def: -
Def: 1
2=Direct selection + ON command
Def: 722:4
Def: 1
Def: 722:5
Def: 1
Def: 1
Def: 10.00
SED2 variable speed drives
Programming
Max: 4000:0
For P2223:
P2223[0]: 1st command data set (CDS)
P2223[1]: 2nd command data set (CDS)
Max: -
Max: 2
3=Binary coded selection + ON command
Max: 4000:0
Max: 2
Max: 4000:0
For P2228:
P2228[0]: 1st command data set (CDS)
P2228[1]: 2nd command data set (CDS)
Max: 1
1=PID-MOP setpoint will be stored (P2240 is updated)
Max: 1
1=Reserve direction inhibited
Max: 200.00
Level 3
Level 3
Level 3
Level 3
Level 3
Level 3
Level 3
Level 3
CM1U5192en
01.2002
- Quick Links:
- Electrical Installation
- Error Code List
Hide quick links:
Advertisement
Table of Contents
