Table of Contents
Advertisement
Complete Sample Configuration
Figure 2-1
Configuration Example
Network
access
server
Cisco 1710 Security Router Software Configuration Guide
2-16
In this example, both the Cisco 1710 Security router and the network access router
have inside and outside interfaces. The outside interfaces have global IP addresses
while the inside interfaces have local IP addresses. These addresses are as
follows:
Cisco 1710 Security router outside interface: 24.119.216.150 255.255.255.0
•
Cisco 1710 Security router inside interface: 192.168.1.0 255.255.255.0
•
•
Network access router outside interface: 16.0.0.2 255.0.0.0
Network access router inside interface: 172.28.0.1 255.255.0.0
•
The outside interface of the router in this example is the Ethernet port, while the
inside interface is the Fast Ethernet port.
Figure 2-1
illustrates the topology of this example.
IP/ATM
Chapter 2
DSLAM/
access
CPE provided
concentrator
DSL
1710 with IPSEC
doing PPPoE
on Ethernet
Cisco 1710 Security Router Configuration
by carrier
Ethernet
Fast Ethernet
78-12696-01
- Quick Links:
- Using Commands
Hide quick links:
Advertisement
Table of Contents
