Transport And Storage; Inspection; Transport; Storing The Insertion Sensor - ABB AquaMaster4 Operating Instructions Manual
Electromagnetic flowmeter
insertion sensor
Hide thumbs
Also See for AquaMaster4:
- Manual (44 pages) ,
- Manual (40 pages) ,
- Operating instruction (72 pages)
Table of Contents
Advertisement
8
A Q U A M A S T E R 4 | E L E C T R O M A G N E T I C F LO W M E T E R I N S E R T I O N S E N S O R | O I/ F E W 4 0 0/A P - E N R E V. B
4 Transport and storage
Inspection
Check the insertion sensor immediately after unpacking for
possible damage that may have occurred from improper
transport. Details of any damage that has occurred in transit
must be recorded on the transport documents. All claims for
damages must be submitted to the shipper without delay and
before installation.
Transport
WARNING – BODILY INJURY
Life-threatening danger due to suspended loads. In
the case of suspended loads, a danger of the load
falling exists.
Remaining under suspended loads is prohibited.
Storing the insertion sensor
Bear the following points in mind when storing insertion
sensors:
• Store the insertion sensor in its original packaging in a dry
and dust-free location.
• Observe the permitted ambient conditions for transport
and storage.
• Do not store the insertion sensor in direct sunlight.
Storage temperature
–20 to 60 °C (–4 to 140 °F)
The ambient conditions for the transport and storage of the
insertion sensor must correspond to the ambient conditions
for operation of the insertion sensor.
Adhere to the AquaMaster4 data sheet (DS/FET400-EN)!
- Quick Links:
- Connections
- Operation
Hide quick links:
Advertisement
Table of Contents
